Palkannan subbaiah

 Acted as PMC representative overseeing the contractor’s civil and structural construction
activities to ensure full compliance with design intent, project specifications, codes, and
GACA regulations.
 Supervised and monitored the execution of reinforced concrete, structural steel,
waterproofing, and finishing works for terminal buildings, concourses, tunnels, and service
corridors.
 Reviewed and endorsed contractor’s shop drawings, method statements, ITPs, and
material submittals, ensuring compliance with approved IFC drawings and design
specifications.
 Conducted daily and weekly site inspections to assess progress, workmanship, and quality;
identified deviations and issued Non-Conformance Reports (NCRs) and Site Observation
Reports (SORs) when required.
 Verified that all works were executed in accordance with ASCE 7, ACI 318, AISC 360, IBC, and
relevant GACA/ICAO standards for airport infrastructure.
 Monitored contractor progress against approved schedules; evaluated productivity, manpower
allocation, and adherence to milestone targets.
 Coordinated with design consultants, contractors, and discipline engineers (Architecture, MEP,
Special Systems) to resolve interface issues, design discrepancies, and site conflicts.
 Reviewed concrete mix designs, rebar detailing, formwork systems, and structural
connections, ensuring quality, durability, and constructability of works.
 Oversaw geotechnical-related works including excavation, dewatering, shoring, foundation
preparation, and backfilling as per geotechnical recommendations
 Supervised fabrication and erection of structural steel elements, ensuring correct alignment,
welding, bolting, and coating as per project QA/QC standards.
 Ensured that testing and inspection activities for concrete, steel, waterproofing, and materials
were conducted by approved ITPs and witnessed by authorized parties.
 Ensured compliance with project safety and environmental requirements, verifying that
works adhered to GACA’s HSE standards and site safety procedures.
 Participated in technical, coordination, and progress meetings, providing input on design,
construction progress, and risk mitigation measures.
 Assisted by the PMC Construction Manager and Resident Engineer in reviewing variation
claims, change orders, and extensions of time related to civil and structural scope.
 Reviewed contractor submittals for RFI, design changes, and technical queries, coordinating with
the design team to issue timely responses and approvals.
 Verified and recommended monthly progress payments based on actual work completion and
quality verification.
 Ensured proper documentation, including as-built drawings, inspection reports, test results, and
handover dossiers, was maintained and submitted for final project closeout.
 Supported commissioning and handover stages, ensuring all punch-list items related to
structural works were completed and approved by relevant stakeholders.
 Maintained effective communication with GACA authorities and stakeholders, supporting
inspections, approvals, and compliance closeouts.

• Led on-site construction supervision for large-scale infrastructure works including taxiways,
apron pavements, drainage systems, duct banks, underground utilities, service tunnels, and
airside signage across 3 active terminal packages in a live airport environment.
• Supervised contractors and subcontractors on a daily basis, monitoring manpower levels,
productivity, material availability, and equipment deployment to ensure adherence to project
schedules and delivery milestones.
• Reviewed and approved method statements, work plans, ITPs, and construction schedules;
coordinated with contractors to maintain progress and resolve technical issues without delays.
• Implemented and enforced QA/QC procedures on site; conducted inspections, witnessed
material testing (concrete, compaction, AGL systems), reviewed test results, and ensured
corrective actions were taken when required.
• Ensured all construction activities complied with approved IFC drawings, project specifications,
and authority regulations including GACA, ICAO, SBC, ASCE, ACI, AISC, IBC, OSHA, AASHTO,
MOT, and RCRC.
• Reduced non-compliance issues by 30% within 3 months through rigorous QA/QC audit
protocols and systematic NCR/SOR corrective action management.
• Ensured proper allocation of manpower, materials, and equipment across airside and landside
work fronts; tracked progress against BoQs and schedules, identifying risks and delays
proactively.
• Coordinated with MEP, electrical, utilities, and survey teams for integrated infrastructure
delivery; managed project documentation including inspection reports, test results, as-builts,
and handover dossiers.
• Supported variation orders, interim payment valuations, and contract administration; attended
technical and progress meetings with client, consultants, and stakeholders.

Jizan Downstream Primary Development - Infrastructure & Utilities | Client/PMC: Royal
Commission / Parsons
• Supervised infrastructure construction works including underground utilities, pipe racks,
drainage systems, substations, foundations, and service networks for a large-scale industrial
development.
• Managed QA/QC compliance for excavation, shoring, backfilling, steel erection, pipeline
installation, and foundation works in accordance with Royal Commission standards, Saudi
codes, and HSE regulations.
• Streamlined method statement approval process, improving stakeholder coordination and
reducing project delays by 20%.

High-Rise Construction - SDB-2 (G+3), SDB-3 (G+9), SDB-4 (G+13) | Client: Infosys | Multi
Phase Campus Development
• Supervised construction of three concurrent high-rise buildings, managing site execution,
subcontractors, and RCC/structural steel works from foundations through to handover.
• Delivered wet and dry utilities, stormwater drainage, sewage networks, internal roads, and
external infrastructure works; enforced QA/QC compliance through WIRs, MIRs, and NCR
management.
• Coordinated multidisciplinary teams (MEP, ICT, facades, elevators) using BIM/Revit to resolve
clashes and maintain site progress; completed snagging, commissioning, and final handover
for all three packages.

 Supervised and executed civil and structural works for industrial buildings, utility corridors,
substations, pipe racks, and foundation systems within the downstream industries zone.
 Ensured construction activities were carried out in accordance with approved shop drawings,
project specifications, and QA/QC procedures, maintaining compliance with Royal
Commission, and Saudi Building Code requirements.
 Managed concrete and steel structure works, including foundation construction, column and
slab casting, precast installations, and steel erection activities.
 Verified reinforcement detailing, concrete mix designs, and material submittals to ensure
conformance with design specifications and project quality standards.
 Supervised excavation, backfilling, dewatering, and compaction works, ensuring proper
implementation of geotechnical recommendations and safety measures
 Monitored formwork, scaffolding, and shoring systems, ensuring they met the design load
requirements and were safely erected and dismantled.
 Oversaw structural steel fabrication and erection, verifying alignment, welding quality, bolting
torque, and painting/coating works as per AISC and project QA/QC standards.
 Coordinated daily with MEP, piping, and instrumentation teams to resolve interface and
alignment issues during foundation and structural works.
 Prepared and submitted Inspection Requests (IRs), Material Inspection Requests (MIRs), and
concrete pour cards for consultant approval.
 Assisted the QA/QC team in conducting field testing and inspections, including concrete cube
testing, rebar bend/tensile testing, and welding inspections

Position: Civil Engineer/Structural Engineer-steel & Concrete
Project: Airport Development Project - Terminals 3, 4 & Link: Location: King Khalid International
Airport (KKIA), Riyadh
Client: RAC, Consultant: AECOM
Rolls and Skills
 Supervised and executed all civil and structural construction works including reinforced
concrete, structural steel, and finishing activities in terminal buildings and link structures.
 Ensured all works were carried out as per approved shop drawings, project specifications,
and QA/QC procedures, maintaining compliance with GACA regulations and international
standards (ASCE, ACI, AISC, IBC).
 Reviewed IFC drawings, shop drawings, and method statements, identifying discrepancies
and coordinating with consultants for technical clarifications.
 Supervised reinforcement works, concrete pouring, curing, and post-casting activities to ensure
structural strength, dimensional accuracy, and durability.
 Monitored structural steel fabrication and erection, including inspection of welding, bolting,
alignment, and painting works as per AISC standards and approved ITPs.
 Coordinated closely with survey, MEP, and architectural teams to resolve interface issues and
ensure alignment with other disciplines.
 Conducted site inspections to verify construction quality and issued corrective actions where
nonconformance was observed.
 Supervised formwork, scaffolding, shoring, and concrete casting operations, ensuring
compliance with safety and quality standards.
 Reviewed and verified material submittals, concrete mix designs, and steel certifications
before installation.
 Assisted the QA/QC department in conducting material testing (concrete cube, rebar
tensile/bend tests, welding tests) and ensured records were maintained for quality
documentation.
 Prepared daily progress reports, inspection requests (RFI/IRs), and coordinated with the
consultant for approvals and inspections.
 Monitored subcontractor performance, ensuring proper manpower, equipment, and resources
were deployed to achieve scheduled targets.
 Verified as-built conditions, prepared red-line markups, and coordinated the preparation of
as-built drawings.
 Coordinated with the Planning Department for monitoring schedule progress and reporting
any potential delays or risks in structural works.
 Ensured safe site practices were implemented during lifting, concreting, and steel erection
activities in compliance with HSE procedures.
 Attended weekly progress and technical meetings with the consultant, client (GACA), and
project management team to review work status and resolve technical issues.
 Assisted in preparation of work inspection requests, concrete pour cards, and inspection
checklists for consultant approval.
 Participated in punch-list inspections and ensured timely rectification of outstanding items
before handover.
 Supported the final testing, commissioning, and project closeout activities related to
structural and civil works for T3, T4, and Link structures.

KKIA - Terminal 3, 4 & Link 3 Upgradation | Client: RAC | Live Airport Construction
• Directed and supervised civil, structural, and infrastructure construction works in a live airport
environment; ensured compliance with approved IFC/shop drawings, QA/QC procedures, and
international aviation standards.
• Supervised contractors and subcontractors on site daily; monitored manpower, scheduled
activities, and enforced HSE/OSHA-compliant safety practices during lifting, concreting, and
steel erection.
• Managed reinforcement, concrete works, structural steel erection (welding, bolting, alignment,
coating), and architectural finishes across terminal buildings and link structures.
• Led multidisciplinary coordination (Survey, MEP, Architectural, Special Systems) using
BIM/Revit, resolving interface clashes to improve constructability and maintain programme.
• Coordinated method statement approvals with consultants, achieving 30% reduction in service
interruptions through improved communication and planning protocols.
• Supported snagging, punch-list closure, testing, commissioning, and phased handover of
Terminal 3, Terminal 4, and Link 3.

 Supervised and managed civil and structural construction activities for multi-story
commercial buildings (Blocks 1, 3 & 4), including reinforced concrete, structural steel, and
finishing works.
 Supervised piling operations (bored cast-in-situ and driven piles), verifying pile depth,
reinforcement, and concrete quality per approved drawings and specifications.
 Monitored pile cap, raft, and footing construction, ensuring reinforcement placement,
formwork, and concreting met structural design requirements.
 Ensured dewatering, shoring, and excavation were executed safely, following approved
geotechnical and safety procedures.
 Managed and supervised all reinforced concrete works, including columns, beams, slabs,
cores, shear walls, and staircases.
 Oversaw structural steel fabrication and erection, verifying member alignment, bolting,
welding quality, and coating systems as per design and QA/QC standards.
 Verified bar bending schedules (BBS), formwork systems, and concrete pouring sequences to
maintain structural accuracy and strength.
 Supervised blockwork, plastering, waterproofing, screed, and interface coordination
between structural and architectural elements.
 Oversaw finishing activities including flooring, wall cladding, ceiling systems, painting, and
façade works, ensuring proper sequence and adherence to design standards.
 Coordinated with MEP and interior fit-out teams to ensure smooth interface between
structural, mechanical, and architectural systems.
 Verified materials, mockups, and sample approvals prior to installation and maintained
inspection records for each trade.
 Conducted snagging and de-snagging inspections, ensuring punch-list closure and
rectification of non-conformities prior to handover.
 Coordinated with consultants, project management, and subcontractors during technical and
progress meetings, resolving design and execution issues.
 Supported final inspection, testing, and commissioning activities and assisted in
preparation of handover documentation to the client.
 Ensured closure of punch lists, defect rectification, and submission of final handover dossiers,
O&M manuals, and test certificates.
 Supported handover procedures for Blocks 1, 3 & 4, ensuring full compliance with client
standards and project requirements.

 Supervised and executed all civil and structural works for multi-storey hostel buildings,
including foundations, superstructure, and finishing works in accordance with approved
drawings and project specifications.
 Supervised excavation, foundation, and concrete works, ensuring correct reinforcement,
formwork, and concrete placement per ACI/IS codes and approved ITPs.
 Monitored structural steel fabrication and erection for roof trusses, staircases, and canopy
structures, ensuring welding and bolting met design and quality standards.
 Coordinated with architectural and MEP teams to resolve site conflicts, maintain alignment, and
ensure smooth progress of interfacing activities.
 Supervised blockwork, plastering, flooring, and waterproofing works, ensuring adherence
to design and architectural details.
 Prepared daily progress reports (DPRs), inspection requests (IRs), and site activity logs,
submitting to the site management and consultant for review and approval.
 Supervised blockwork, plastering, flooring, and waterproofing works, ensuring adherence
to design and architectural details.
 Monitored subcontractor works, verified quantities, and ensured compliance with approved
shop drawings and quality standards.
 Implemented HSE standards during site execution, ensuring safe work practices, toolbox talks,
and hazard identification were conducted regularly.
 Participated in coordination and progress meetings with project management, consultants,
and clients to review construction status and resolve issues.
 Assisted in snagging and de-snagging activities during inspection and ensured completion of
punch-list items prior to handover.
 Verified as-built dimensions, prepared red-line markups, and coordinated preparation of final
as-built drawings for handover.

Multi-Storey Buildings - Civil & Structural Execution | Client: Government PWD
• Supervised all civil and structural works for multi-storey hostel buildings; enforced QA/QC, HSE
standards, and coordinated with MEP and architectural teams to ensure smooth interface
progress and on-time handover.

 Supervised daily site activities include excavation, concreting, reinforcement, shuttering, and
masonry works as per approved drawings and construction schedule.
 Ensured work execution followed structural and architectural drawings, project
specifications, and safety procedures.
 Coordinated with site engineers, foremen, and subcontractors to maintain smooth workflow
and achieve daily targets.
 Checked formwork, rebar placement, and concrete preparations before inspection and
approval.
 Monitored quality of materials (cement, sand, aggregates, steel, etc.) and ensured proper
storage and handling at site.
 Verified levels, dimensions, and alignments during structural works using basic surveying
tools.
 Supervised blockwork, plastering, waterproofing, and finishing works, ensuring proper
workmanship and adherence to standards.
 Maintained daily progress reports, site diaries, and labor attendance records for submission to
project management.
 Coordinated concrete casting activities, including cube testing, curing, and finishing for
required surface quality.
 Ensured availability of materials, manpower, and equipment as per the day-to-day site
requirements.
 Reported site issues, material shortages, or technical deviations to the site engineer for
timely resolution.
 Implemented safety procedures and housekeeping practices to ensure a safe working
environment for all workers.
 Assisted in inspection requests (IRs) and joint site inspections with client/consultant
representatives.
 Supported preparation of as-built records and provided input during finishing and handover
stages.

Residential Apartments - Structural & Infrastructure Construction
• Supervised daily site activities including concreting, reinforcement, masonry, and finishing;
maintained DPRs, coordinated subcontractors, and supported inspection requests and
handover activities.