Bayt.com

كلما زادت طلبات التقديم التي ترسلينها، زادت فرصك في الحصول على وظيفة!

إليك لمحة عن معدل نشاط الباحثات عن عمل خلال الشهر الماضي:

عدد الفرص التي تم تصفحها

عدد الطلبات التي تم تقديمها

استمري في التصفح والتقديم لزيادة فرصك في الحصول على وظيفة!

هل تبحثين عن جهات توظيف لها سجل مثبت في دعم وتمكين النساء؟

اضغطي هنا لاكتشاف الفرص المتاحة الآن!
نُقدّر رأيكِ

ندعوكِ للمشاركة في استطلاع مصمّم لمساعدة الباحثين على فهم أفضل الطرق لربط الباحثات عن عمل بالوظائف التي يبحثن عنها.

هل ترغبين في المشاركة؟

في حال تم اختياركِ، سنتواصل معكِ عبر البريد الإلكتروني لتزويدكِ بالتفاصيل والتعليمات الخاصة بالمشاركة.

ستحصلين على مبلغ 7 دولارات مقابل إجابتك على الاستطلاع.


تم إلغاء حظر المستخدم بنجاح
شكراً لك، تم إرسال بلاغك وسيتم مراجعته قريباً.
رينالدو Garcia, QA/QC Civil Engineer/INSPECTOR

رينالدو Garcia

QA/QC Civil Engineer/INSPECTOR·Saudi Engineering Group International (SEGI Consulting)

الفلبين

بكالوريوس, Civil Engineering

الخبرة العملية

مجموع سنوات الخبرة: 18 سنوات, 9 أشهر

QA/QC Civil Engineer/INSPECTOR

يوليو 2015 - نوفمبر 2018

Saudi Engineering Group International (SEGI Consulting)

الدمام، المملكة العربية السعودية

يوليو 2015 - نوفمبر 2018

SEC formerly SCECO
Project Handled:
•380 KV D/C OHTL from JIZAN JRPP to Muhayel West BSP/Madhayah BSP B/W JAZAN REFINERY PP KUDMI BSP/ JEC-JRP to ABHA East KV BSP and SUBSTATION S/S (Completed)
•TABUK 380Kv/132Kv/33Kv BSP
•DUBA Green Power Plant Project
•AL-Wajh 380Kv/132Kv/33Kv and 13.8Kv BSP/OHTL Umlujj

□REVIEW Quality Plan, Inspection Test Plan, Method Statement, Material Technical for approval/Material Inspection Report (RFI) and Specification/codes.
□Monitoring and Administering the QA/QC Plan or Program and ensuring incorporated material on construction project is in compliance with the plans and specifications.
□Assuring that the work is performed as required by the contract and meets or exceeds the required qualities.
□Witness during Soil Investigation/Drilling with sample taken, access road, structure pad, drilling foundation up to concreting 1st stage and 2nd stages (re-bars, formworks of Leg foundation on Tower Structure alignment/grounding cable of electrical up to Erection of Tower Structure Inspection/Documentation/Audit and up to hand over completion of project.
□Check the Concrete Design as per client approval, concrete sample cubes for 7 days and 28 days, Temperature of concrete, slump test and attend for compression strength test and documented.
□Assuring the acceptable quality of materials, processes and workmanship in the project work.
□Attend of meeting Construction/QA-QC issue external and internal
□ Carry out inspection and checking for all quality related procedures in the site and ensures activity at site are as per approved method statement and inspection test plan.
□ Coordinate with the Site Consultant’s Representative and Site In-charge Engineer for inspection and meeting about quality problems including issued/ closure of Non-Compliance Report to the Contractor.
□Maintain standards of safety and comply with Company’s Health, Safety and Environment Management System requirements (5-STAR Implementation).
□Check the elevation requirement as per approved drawing for concrete and structure together with survey group.
□Review/check the alignment of steel structure from material handling, sequence for erection procedure, alignment of structure per tolerance, bolting inspection.
□ Check all calibration certificate for all tools/equipment for steel structure and civil.
□Follow and maintain Company standards of Quality in accordance with Company Quality System requirements.
مجال الشركة:
البناء والتشييد
الدور الوظيفي:
مراقبة الجودة

QA/QC Engineer

أكتوبر 2012 - يوليو 2015

2014Gulf Mass Engineering and Construction Ltd. Shaybah

المملكة العربية السعودية

أكتوبر 2012 - يوليو 2015

PKG#4 IGHC, GOSP-3 / Tower Line Erection -ARAMCO Project
□Ensure construction work is performed and completed in accordance with contract documents.
□Monitor contractor's quality process, and coordinate field sampling and testing for verification of quality results as needed.
□Prepare daily inspection reports, daily construction progress photographs and other quality record as required.
□Observe and document safety performance of the contractor. Include safety observations.
□Assist Resident Engineers and Office Engineer in verification of quantities.
□Planning/Resolve construction issues.
□Assist in the RFI, submittal and change order review processes and review of the contractor's work implementation.
□Maintain field "As Built" Drawing.
□Perform material receiving inspections.
□Ensure that Audit finding are being attended to and help in the closing out process where possible.
□Responsible for Tower erection Inspection for Steel Structure Materials, Alignment survey report inspection/bolt tightening report Inspection including guy wire alignment up to Painting Visual Inspection and SAFETY FIRST always.
الدور الوظيفي:
مراقبة الجودة

QA/QC Engineer

ديسمبر 2004 - مايو 2015

2005Hyundai Engineering & Construction Co. Ltd

الإمارات العربية المتحدة

ديسمبر 2004 - مايو 2015

New 132/11 KV Substation S16 & S18, CN#N2106
□Review/Check the Inspection Test Plan (ITP), Project Quality Plan/Quality Procedure, Method Statement, Specification including Approved Drawing for Construction.
□Responsible and witness for inspection of Piling load Test, Excavation, Rebar/Concrete, Backfilling, Soil Compaction Test, Sample taken for 7 days and 28 days cubes, Tensile Test for Rebar, Integrity Test and Material Receiving Inspection with proper document.
□File and kept all inspection document as QA Standard.
□Direct coordinate of Project Consultant/Sub-Contractor about daily Quality status and attend weekly/monthly meeting.
□Follow Safety Rules, always.
الدور الوظيفي:
مراقبة الجودة

QA

يوليو 2000 - أغسطس 2010

2002Hyundai Engineering & Construction Co. Ltd./Snamproggetti (JV)Ummsaid

قطر

يوليو 2000 - أغسطس 2010

4, EPC Project (QGPC-CONNOCO PHILLIPS)
□Responsible for all QA/QC Civil/Steel Structure Inspection and related activities.
□Check and review the Quality plan, ITP, Method Statement, specification/codes for the proper construction and quality implementation at job site, perform pre-inspection to ensure that all installed materials are with in the standard and approved by client in conformance to applicable drawings and specification.
□Conduct of final inspection with owners representative prior to proceed concrete pouring and other succeeding work activities that requires step by step inspection and testing procedures(ITP).
□Conduct for inspection of Steel Structure from Padding plate leveling/alignment of structure (horizontal and vertical) Grouting up to curing compound method.
□Responsible of Inspection for Compaction test, Backfilling, Formwork/Reinforcement rebar, concreting-sample taken for 7 and 28 days, attend for concrete crushing in laboratory with documented, Building, manholes, catch basin, ditches, asphalt and concrete paving including sewer/drainage system.
□Keep and maintain all document for future purposes.
□Prepare Punch-List through checking and identifying areas requiring modification of additional work and with those in contradiction assist in the resolution.
□Involve also for 21 days Tie-In (SHUT DOWN) in NGL-3 of Package test document preparation / inspection witness and submitted to Client for acceptance.
□Safety first always!
الدور الوظيفي:
مراقبة الجودة

QC

سبتمبر 2008 - أغسطس 2008

2010JGC/KBR Joint Venture

قطر

سبتمبر 2008 - أغسطس 2008

Pearl GTL-3 SHELL/QATAR GAS Project
□Conduct self in appropriate manner as a representative of the owner working effectively in a diverse work environment.
□Review/Check of Inspection Test Plan, Project Quality Plan, Specification, Method Statement including change orders relevant to the tasks to be performed.
□Review and Familiarize all relevant Code requirements and reference standards.
□Monitor/Check Pre-Fabricated Materials from Materials, dimensional, visual checking of welding as per AWS-D1.1 up to painting before erection at site.
□Responsible for Inspection of all related scope on Steel Structure M odule Installation /erection for acceptance.
□Conduct on actual demonstration for Bolts Tensioning Method as per procedure.
□Witness for Inspection from Padding Plate Leveling, Structure Alignment (Horizontal/Vertical) and bolt tightening as per procedure.
□Develop and implement internal quality guideline which include ISO/Establish quality standard, work procedures and their implementation.
□Execution of system Audit are correct (working papers) kept by the auditor procedures applied, test performed, information obtained and pertinent conclusion and the document provides the principal support for the auditor’s report base on the ITP/PROCEDURES/SPECIFICATION and other approved document.
□Strong HSE mindset and join TSTI daily.
الدور الوظيفي:
مراقبة الجودة

- يناير 2008

SGS

الإمارات العربية المتحدة

- يناير 2008

مجال الشركة:
النفط والغاز

Structural Engineer

فبراير 2003 - يونيو 2003

2004Hyundai Engineering & Construction Co. Ltd. Assaluyah

الإمارات العربية المتحدة

فبراير 2003 - يونيو 2003

IRAN South Pars Gas Field Project, Phase 4&5
□Ensure that the company policies and procedures are maintained and implemented at all times, whilst continuously seeking ways to improve refine and modify procedures.
□Review/Evaluate of Plan drawings with Bill of Materials/Specification and Procedures correspond to the up-dated revisions and changes had been implemented as required to maintain a balance technical consistency against actual work condition.
□Supervise/Monitor of up-dated daily progress report from Fabrication and Site Erection for steel structure.
□Supervise/Inspect of direct work ascertaining proper execution and implementation of work scope is within the acceptable standard engineering procedure Code and Practice also Client Specification.
□Proper Monitoring and attend for inspection from marking layout, cutting, fit-up, full weld and paint for all materials to be released for erection.
□Calculation of total fabricated quantities and preparation of Client Bill as per as-built site condition.
□Coordinate of QA/QC Engineer/Third Party to get approval of materials/works and information given at appropriate time to ensure overall quality of the work by proper planning required testing/inspection requirement.
□Coordinate the workload and distribute the work amongst the workers.
□Supervise the appointed workers (Fabricator, Welders, Riggers, Erectors and Painters) and effectively complete the workload in the allocated time frames.
□In-charge of Steel structure pipe rack materials in the Fabrication.
□Keeping a daily log of all detail work force and material used.
□Participating in Engineers weekly/monthly meetings, preparing points for discussion, following orders and requests for consumables material.
□Submitting weekly and monthly reports.
□Think positively to Safety.
الدور الوظيفي:
الهندسة المدنية

QA

يوليو 2011 - مايو 2001

2012SK ENGINEERING & Construction Co. Ltd.Al-Ruwais

الإمارات العربية المتحدة

يوليو 2011 - مايو 2001

/QC Steel Structure/Material Mech’l. Inspector
EPC # 1, Ruwais Refinery Expansion Project
□Review/Study QA/QC Procedures, Inspection Test Plan (ITP) Quality Plan, Method Statement, Specification and other documents from Client Approved.
□Responsible for Material Releasing Inspection both Steel Structure/Rotating - Static Equipment and proper document required during inspection (RFI).
□Monitor/Conduct Inspection of early completed of Steel Structure and Static works to ensure that the materials and installation are accordance with the approved plan and Specification.
□Full follow-up Inspection and compile up dated daily Inspection record.
□Visual checking on welding for Pre- Fabricated Structures from Fabrication Shop including Painting.
□Proper coordination on Sub-Con/Company about the daily status of quality on site.
□Conduct internal inspection, monitoring and surveillance.
□Prepare NCR/PAR/CAR if needed.
□Attend of QA/QC meeting and other Surveillance from construction group.
□Report to QA/QC Manager and Construction Manager.
□Follow the rules of Company.
الدور الوظيفي:
مراقبة الجودة

QA

ديسمبر 1996 - ديسمبر 1996

1997Hyundai Engineering & Construction Co.Ltd.Jahra Centre, State of KUWAIT

ديسمبر 1996 - ديسمبر 1996

Sabiya Power Plant Station Sea Water Line
Desalination Plant Project (2400 MW)
□Checked/ read of Fabrication/Erection drawing, Inspection Test Plan (ITP)
Quality Plan Procedures, Method Statement and Project Specification.
□Check all calibrated and non-calibrated equipment certificate before start of inspection test
as per procedure.
□Responsible for acceptance for inspection delivery before unloading in lay down yard and
Inspection for alignment (vertical and horizontal) of structure, bolt tightening and grouting on
Base foundation for steel structure including curing method.
□Responsible for painting touch-up damaged made during erection of structure as per
Procedure required.
□Responsible for audit of steel structure document and cross check by client.
□File kept as per QA/QC Standard for document.
□Responsible to ensure all safety requirements and procedures had been securely established
to prevent accident/incident injury and damaged for equipment.
الدور الوظيفي:
مراقبة الجودة

Site Engineer

أكتوبر 1995 - مارس 1995

1996Saudi Techint Ltd

المملكة العربية السعودية

أكتوبر 1995 - مارس 1995

SWCC-Yanbu Desalination PIPELINE Plant Project(500 KM-Yanbu to Madinat)
□Review/Evaluate Plan Drawings with Bill of Materials as per specification and procedure correspond to the up-dated revisions and changes had been implemented as required to maintain a balance technical against actual work conditions.
□Supervise and direct works ascertaining proper execution and implementation of scope of work is within the acceptable standard engineering procedure code and practice and to client Specification.
□ Calculation of total fabricated quantities and preparation of Client Bill as per as-built site condition.
□ Conduct of final inspection with owners representative prior to proceed concrete pouring and other succeeding work activities that requires step by step inspection and testing procedures (ITP).
□Coordinate the workload and distribute the work amongst the workers.
□Supervise the appointed workers (Fabricator, Welders, Riggers, Erectors and Painters) and effectively complete the workload in the allocated time frames.
□Keeping a daily log of all detail work force and material used.
□Participating in Engineers weekly/monthly meetings, preparing points for discussion, following orders and requests for consumables material.
□Submitting weekly and monthly reports.
□Think positively to Safety.
الدور الوظيفي:
الهندسة المدنية

Design Draughtsman

يونيو 1992 - مارس 1992

20, 1993John Brown Saudi Arabia Ltd

المملكة العربية السعودية

يونيو 1992 - مارس 1992

IBN ZAHR Polypropylene Plant Project
□Calculate excavation tonnage and prepare graphs and fill hauling diagrams for use in earth moving operations.
□Calculate weights, volumes and stress factors and their implication for technical aspects of designs.
□Draft plans and detailed drawings for structures, installation and construction project such as road, sewage disposal systems and dikes, additional foundation pipe supports working from sketches or notes.
□Check/Review of Inspection Test Plan/Quality Plan/Specification/Method Statement and related Standard Procedure approved by client.
□Witness for inspection of all civil activities on site.
الدور الوظيفي:
الهندسة

Civil Draftsman

يناير 1990 - مارس 1990

1992M.S. AL- SUWAIDI Est.Rahima-Rastanur

المملكة العربية السعودية

يناير 1990 - مارس 1990

Samad Housing Proj. & Pipeline Project-ARAMCO
□Manually preparation of complete civil plan of Housing and pipeline support foundation including structural support on pipes.
□Working on the BOQ.
□Assisting in project documentation and project reports.
□Responsible for manpower preparation, equipment, tools and materials use on site.
□Supervise/Monitor of daily progress works and prepares the report for submission.
□Participating in Engineers weekly/monthly meetings, preparing points for discussion, following orders and requests for consumables material and Safety rules implemented always.
الدور الوظيفي:
الهندسة المدنية

Supervisor

أكتوبر 1994 -

25, 1995Shinwha Engineering & Const. Co.Ltd

الإمارات العربية المتحدة

أكتوبر 1994 -

LNG Gas Plant Project
□Read/Review all Civil drawings approved for construction and materials take-off.
□Supervise and direct work ascertaining proper execution and implement as required of maintain a balance technical consistencyagainst actual work condition.
□Responsible for site preparation -survey, excavation, reinforcement, concrete pouring,
Formworks, backfilling and curing system as per client standard.
□ Coordinate the workload and distribute the work amongst the worker.
Monitoring daily work progress percentage and follow to planning schedule charted.
□Responsible for directing, planning, coordinating and budgeting activities related to the civil works.
□Participating in the conceptual development of a construction project and overseeing the scheduling, organizing and implementation is also a part of the job and implement of quality control programs as well.
□Interface and coordinate with various engineering disciplines including vendors/ representatives so as to have positive and constructive work compatibility in fulfilling the
client’s task throughout the project and follow the rules of company.
الدور الوظيفي:
الهندسة

التعليم

Feati University

أبريل 1986

أبريل 1986

بكالوريوس، Civil Engineering

الفلبين

المعدل التراكمي (التقدير): جيد

المعدل التراكمي (التقدير): جيد

Graduated/completed

Skills

Civil Works

Expert

Documentation

Expert

Inspection

Expert

BALANCE

Expert

CLOSING

Expert

CUSTOMER RELATIONS

Expert

DELIVERY

Expert

DOCUMENTATION

Expert

ENGINEERING

Expert

FINAL

Expert

GRAPHIC DESIGN

Expert

MATERIALS MANAGEMENT

Expert

MEETING FACILITATION

Expert

Civil Works

Expert

Documentation

Expert

Inspection

Expert

اللغات

الانجليزية

متمرّس

التوصيات

Jeff Simmons

فبراير 2022

فبراير 2022

Senior Vice President , Chief Petrotechnical Officer•Client

Greetings Reynaldo Garcia, Pleased to be shared in your connection as friend. I am Mr. Jeff Simmons, Senior Vice President , Chief Petrotechnical Officer at Occidental Petroleum Corporation ( OXY ). I am contacting you in respect of our company quest in giving out a Four(4) years supply contract. Occidental Petroleum Corporation is in scarce of a product which we use for production and it is affecting our manufacturing skills therefore making us unable to fulfill our supply chains with our customer/s. On this regards we are willing to award this contract to any reliable individual or company who can capably handle this contract. I will proceed in details when i receive your kind respond. If you are interested in this contract offer kindly contact me via my email " jeffsimmons @oxycorporations.com " for more details of the contract before i direct you to our company to apply for this contract officially. NOTE: Due to the restriction of pasting email addresses here, i implied a means of spacing my email. So i would like you to combine/bring them together to get my correct email address. I will proceed in details when i read from you. Best regards, Mr. Jeff Simmons, Senior Vice President , Chief Petrotechnical Officer. Occidental Petroleum Corporation ( OXY ) Email: jeffsimmons @oxycorporations.com

الهوايات والاهتمامات

mountaineering and planting all plants/wood at farm

my plants -wood were getting to support on my necessities needs