Srinivasa Rao, LEAD PROCESS ENGINEER - PMC

Srinivasa Rao

LEAD PROCESS ENGINEER - PMC

ADNOC Offshore

Location
India
Education
Bachelor's degree, Chem. Eng
Experience
25 years, 6 Months

Share My Profile

Block User


Work Experience

Total years of experience :25 years, 6 Months

LEAD PROCESS ENGINEER - PMC at ADNOC Offshore
  • United Arab Emirates - Abu Dhabi
  • My current job since February 2019

With 30 yrs Expertise in value engineering and project startup audits. I have worked adapting all HSE guidelines from IDENTIFY to OPERATE stages of various projects. Involved in Design review, HAZOP, SIL Classification for various projects. Involved in QRA/FRA/HAZID/ALARP & Project start-up Audits. I have updated knowledge in the latest technology such as EOR, (Polymer, steam flooding, REED BED water disposal, MCRC, Familiar with Saudi ARAMCO standards. Also have expertise in Pre-commissioning and commissioning of various O& G facilities.

ADNOC OFFSHORE PMC Process Engineer - Feb 2019 -
Umm Saif Gas Cap development Project: To develop additional new gas gas discoveries and to recover 50 MBD condensate and 600 MMSCFD gas for total gas reinjection with Phase - 2 to ramp up to 100 MBD & 1.2 BMCFD (Unconventional) - Concept / FEED - 30 Mln USD - Concept FEED is ongoing.

Process Specialist at PETRONAS
  • Malaysia
  • February 2016 to August 2018
PROCESS COORDINATOR
  • May 2011 to November 2011

Process support for the reliability engineering. Involved in criticality analysis of process units, Review of complete refinery scope and unit level criticality analysis. & RCM.

Involved in preparation for criticality analysis, RBM and FMECA for the process & utilities units.

Process support in multidiscipline team and conducting workshops with clients.
Re-Analysis of SIL, C& F and HAZOP report recommendations.


•GASCO FEED -Sales gas supply to Takreer RRD & Shuweihat area (

Sr. Process Design Engineer
  • August 2007 to July 2008

KNPC 2, Mina Al Shuaiba Refinery
Kuwait
Process Eng. -
Tech. Services
Aug.’ 02 -July ’07

Senior Process Design Engineer at Worley Parsons
  • Oman
  • August 2007 to July 2008

NIMR Deep water disposal Facility (DWD) Phase - 7 for PDO, Oman

Process Technologist
  • August 2002 to July 2007

Kuwait National Petroleum Co -

Operations Engineer at M/s DELTA HUDSON
  • Canada
  • June 2001 to July 2002

: Crude distillation / LPG Recovery Unit

Project Management Consultant at Chennai Petroleum Corp
  • January 1992 to January 2002

for multidiscipline activities for the Revamp / Brownfield secondary and tertiary effluent treatment .Carried out additional loads evaluation, composition and stream analysis, discussion with various vendors for technology selection to meet K- EPA guidelines for effluent discharge. Preparation of Feasibility report for Revamp of existing effluent treatment facilities. Support interface with other ongoing projects. Supported Feed stage of project.

Process Technologist: Offsite, tank farm / ETS & MARINE OPERATING FACILITIES

Regular Monitoring of Inventory and transfer of storage tanks and specific follow up on slop oil tanks. Preparation of inventory / monitoring reports on Refinery Slop oil management.

Troubleshooting problems related to operational flexibility & providing solutions. Preparation of Process Tracking Sheet, Preparation of Process and conceptual flow schemes related to modifications in Offsite, tank farm & Oil pier. Process calculations using PIPESIM 3.2, HYSYS, INSTRUCAL & TL-NET such as press drop for piping, pump suitability, etc and design calculations for any modification in pipeline transfer & offsite area.

Proposing modifications, participating in HAZOP study, Risk analysis pertaining to the proposed modifications and following up on their implementation, execution & commissioning.

Performing material & energy balance, sizing of equipment, pipelines, orifice plates, control valves etc. & process design calculations by using software packages Pro II, InstruCal etc.

Providing process engineering assistance in preparing instructions and plans for maintenance work related to startup, shutdown and turnaround activities.
A. General Refinery Turnaround (GRTA 2006)
B. Chemical Decontamination of Process Equipment’s.
C. SLOP Oil Management In Shuiaba refinery

Operation of Crude Distillation Unit: As unit in charge operated in shifts, 100 MBPD Crude distillation and associated LPG Treating unit & Flare Gas Recovery Unit, Successfully faced and resolved 6 major emergencies.

(

Process Engg
  • July 1996 to August 2001
at CPCL
  • India
  • November 1999 to June 2001

Involved in Design Basis, Review of PFS, PEFS, PSFS, Preparation and Review of FEED Package for Effluent treatment Facilities along with M/s EIL for capacity of 500 m3 / Hr capacity with Primary/Chemical & Biological treatment facilities to discharge and reuse of treated effluent meeting USEPA norms.

CSR at CPCL
  • India
  • February 1996 to December 1997

Involved in total life cycle of execution of Project jointly Licensed by M/s. Delta Hudson, Canada M/s. Engineers India Limited. Amine Recovery unit/Sour Water Stripper Unit/Utilities (consisting of cooling tower, Nitrogen system, plant / Instrument air system etc. by Engineers India Limited were also being erected. Commissioning support rendered.

Acid gas Recovery Unit (SRU) (2x250 TPD) MCRC process (Sep 96 - Dec 97) as PMC

Involved in total life cycle of execution of Project jointly Licensed by M/s. Delta Hudson, Canada M/s. Engineers India Limited. Amine Recovery unit/Sour Water Stripper Unit/Utilities (consisting of cooling tower, Nitrogen system, plant / Instrument air system etc. by Engineers India Limited were also being erected.

Environment Impact Assessment/ QRA /HAZOP/HAZID Safety studies for refinery (Dec 97 - Nov 98)

•Involved in scope of work preparation for the Environment / safety studies
•Reviewed the TBE and coordinated in the technical evaluation of the Third party Consultant
•Involved in the Field trials and data collection
•Supported and associated with the Consultant for the Model reviews
•Reviewed the Draft report and finalized the study
•Executed the recommendation and supported and participated with the Regulatory authorities for clearances.

3 MMTPA refinery configuration (Dec 98 - Oct 99)

Preparation of feasibility report
Prepared the Concept identification report
Supported Economic analysis
Developed the screening analysis for the refinery configuration
Presentation made to Management for the chosen options
Evaluation of the

Process Development Engineer at Manali Refinery
  • India
  • April 1993 to June 1996
Operations Engineer at SAIL
  • India
  • March 1992 to June 1993
Engineer Trainee at Chennai Petroleum Corporation Limited (CPCL)
  • July 1991 to February 1992

It is a group company of Indian Oil Corporation Limited with a total refining capacity of 230 MBPD.

2 Mina Al Shuaiba (SHU) refinery is one of the refineries of Kuwait National Petroleum Company (KNPC) with a refining capacity of 200 MBPD.

3 Worley Parson, is world renowned Engineering company with wide interest in the area of Energy and resources with offices all over world.

4 ENI Saipem Sharjah Engineering, is world renowned EPC Company with wide interest in the area of Energy and resources with offices all over world

5 Petroleum Development Oman (PDO) is renowned government of Oman & SHELL JV upstream operating Company.
6 PETRONAS is renowned government of Malaysia & Malaysian Refining co JV.
7 Tata Projects Ltd, Renowed organisisation in the filed of oil and gas, renewable energy.
8 ADNOC OFFSHORE, is renowed Oil Exploration ownewed by Govnerment of UAE

Education

Bachelor's degree, Chem. Eng
  • at Coimbatore Institute of technology
  • July 2019

(

Master's degree, International business
  • at Pondicherry University
  • July 2019

(

Specialties & Skills

Refinery
Leading Projects
Technical Services
Gas Processing
CONCEPT DEVELOPMENT
CONSULTING
CUSTOMER RELATIONS
DATA COLLECTION
ECONOMICS
HUMAN RESOURCES

Languages

English
Expert