مجموع سنوات الخبرة: 29 سنوات, 0 أشهر
أغسطس 2008
إلى حتى الآن
Biomedical Engineer
في Dubai Health Authority
البلد :
الإمارات العربية المتحدة - دبي
Responsible in setting up new medical equipment machines and conducting pre-delivery inspection prior to installation at location
-Installation; commissioning; ppm and repair/service - Install, adjust, maintain, and/or repair biomedical equipment. Evaluate, negotiate and manage service contracts.
- Provide engineering and technical expertise on all matters related to medical technology, especially in the process of planning, review, evaluation, and specification of medical equipment;
- Develop and provide a comprehensive in-service education program on the safe and effective use of medical equipment for both medical and nursing staff.
- Conduct technical training to team members and endusers when required.
- Write accurate professional reports on technical issues and interfacing with all involved functions.
- Report and escalate all observed incidents, irregularities that occur through proper operational escalation points.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Ensure that all medical equipment is properly maintained and documented.
- Develop and implement short and long term strategies for the development and direction of the department to effectively manage medical equipment and technology in the clinics.
- Minimize, investigate and rectify hazard risks associated with medical equipment use.
- With minimal supervision, evaluate progressively complex, enduser biomedical equipment issues, implement appropriate repairs; as assigned, perform planned maintenance (PM), safety and environmental inspections and maintain effective customer relations. Follow appropriate policies, procedures, hospital protocol and complete necessary documentation.
- Maintain daily communications with endusers and Internally, to ensure resolution and proper follow-up, leading to enduser satisfaction.
- Assist more and less experienced technicians on basic and complex repairs /resolution respectively. Work as a member of local team to provide efficient service delivery to all accounts within assigned area. When trained, share on-call / pager responsibility. - Document all Installation/commissioning/repair actions and submit reports/summaries according to schedule. Ensure proper care of spares, tools and test equipment and ensure calibration. Maintain approved parts inventory.
- Meet Health and Human Services, Environment Health and Safety requirements and/or all other applicable regulatory requirements.
- Perform other duties within the scope of the job and its technical capacity
-Installation; commissioning; ppm and repair/service - Install, adjust, maintain, and/or repair biomedical equipment. Evaluate, negotiate and manage service contracts.
- Provide engineering and technical expertise on all matters related to medical technology, especially in the process of planning, review, evaluation, and specification of medical equipment;
- Develop and provide a comprehensive in-service education program on the safe and effective use of medical equipment for both medical and nursing staff.
- Conduct technical training to team members and endusers when required.
- Write accurate professional reports on technical issues and interfacing with all involved functions.
- Report and escalate all observed incidents, irregularities that occur through proper operational escalation points.
- Evaluate the safety, efficiency, and effectiveness of biomedical equipment.
- Ensure that all medical equipment is properly maintained and documented.
- Develop and implement short and long term strategies for the development and direction of the department to effectively manage medical equipment and technology in the clinics.
- Minimize, investigate and rectify hazard risks associated with medical equipment use.
- With minimal supervision, evaluate progressively complex, enduser biomedical equipment issues, implement appropriate repairs; as assigned, perform planned maintenance (PM), safety and environmental inspections and maintain effective customer relations. Follow appropriate policies, procedures, hospital protocol and complete necessary documentation.
- Maintain daily communications with endusers and Internally, to ensure resolution and proper follow-up, leading to enduser satisfaction.
- Assist more and less experienced technicians on basic and complex repairs /resolution respectively. Work as a member of local team to provide efficient service delivery to all accounts within assigned area. When trained, share on-call / pager responsibility. - Document all Installation/commissioning/repair actions and submit reports/summaries according to schedule. Ensure proper care of spares, tools and test equipment and ensure calibration. Maintain approved parts inventory.
- Meet Health and Human Services, Environment Health and Safety requirements and/or all other applicable regulatory requirements.
- Perform other duties within the scope of the job and its technical capacity
يونيو 2004
إلى حتى الآن
Bio-Medical Engineer
في New Medical Centre
البلد :
الإمارات العربية المتحدة - دبي
Job Profile includes Trouble-shooting, repair and calibration of Fukuda ECG machines, Vitalogragh spirometers, Welch Allyn Monitors and Engle Dental Chairs .
Includes demonstration, updation of User and demonstration.
Includes demonstration, updation of User and demonstration.
مارس 2002
إلى يونيو 2003
Biomedical Engineer
في Ministry of Health
البلد :
عمان
Trouble-shooting, repair & maintenance of Dialysis machines such as Fresenius, Althin & Gambro.
· Maintenance of Reverse Osmosis Plant of Culligan Technology
· Periodical tests and procedures carried out for maintenance of Water purity as per AAMI standard.
To maintain the tolerance of
1.Chlorine.
2.Hardness
3.Ph value
· Maintenance of Reverse Osmosis Plant of Culligan Technology
· Periodical tests and procedures carried out for maintenance of Water purity as per AAMI standard.
To maintain the tolerance of
1.Chlorine.
2.Hardness
3.Ph value
مايو 1995
إلى مارس 2002
Junior Bio-Medical Engineer
في Sri Ramachandra Hospital
البلد :
الهند
· Repair, Periodical Calibration & Maintenance of both Pre-configured & Modular types of Monitors.
· Troubleshooting of Multi-parameter Modules & Single parameter modules. Ethernet & TCP/IP networking of Spacelabs monitors (central & patient), Capnographs &Multigas Analyzers.
· Repair & Calibration of Ventilators namely Siemens, Puritan &Bennett 7200, Hamilton, Drager Evita & Bear.
· Repair of Patient Warmer Machines namely Bair Hugger & Infant Warming Systems.
· Repair & Troubleshooting of Surgical Diathermies namely Erbe, L&T, Valleylab & Bard.
· Repair, Periodical Calibration & Maintenance of Defibrillators namely Physiocontrol9B & S&W.
· Repair & Maintenance of Anaesthesia equipments namely Boyle Tec, Drager & Heyer.
· Repair & maintenance of Dialysis machines such as Fresenius, Cobe& Nipro.
· Co-ordination with company engineers for installation, service, maintenance & AMCs of Medical & Diagnostic Machines.
· Training the end user to operate & maintain the equipments and its accessories.
· Co-ordination of technicians & lower cadre staff to various jobs, departments depending upon the nature and priority of the breakdown.
· Training of Allied Health & Nursing students on the theory of operation. Application & usage of equipments
· Co-ordination with Companies for Equipment insurance.
· Trouble-Shooting, Repair &Power distribution of U.P.S to various Life- supporting & therapeutic equipments.
· Management of Company's customer support & A.M.Cs.
ADDITIONAL INFORMATION:
Training Undergone:
1. Network theory of Monitors, Modules & telemetry by Space labs Inc USA at New Delhi.
2. Technical training of Fresenius Dialysis Machines at Muscat.
3.Technical training of Baxter Althin machines at Muscat.
· Troubleshooting of Multi-parameter Modules & Single parameter modules. Ethernet & TCP/IP networking of Spacelabs monitors (central & patient), Capnographs &Multigas Analyzers.
· Repair & Calibration of Ventilators namely Siemens, Puritan &Bennett 7200, Hamilton, Drager Evita & Bear.
· Repair of Patient Warmer Machines namely Bair Hugger & Infant Warming Systems.
· Repair & Troubleshooting of Surgical Diathermies namely Erbe, L&T, Valleylab & Bard.
· Repair, Periodical Calibration & Maintenance of Defibrillators namely Physiocontrol9B & S&W.
· Repair & Maintenance of Anaesthesia equipments namely Boyle Tec, Drager & Heyer.
· Repair & maintenance of Dialysis machines such as Fresenius, Cobe& Nipro.
· Co-ordination with company engineers for installation, service, maintenance & AMCs of Medical & Diagnostic Machines.
· Training the end user to operate & maintain the equipments and its accessories.
· Co-ordination of technicians & lower cadre staff to various jobs, departments depending upon the nature and priority of the breakdown.
· Training of Allied Health & Nursing students on the theory of operation. Application & usage of equipments
· Co-ordination with Companies for Equipment insurance.
· Trouble-Shooting, Repair &Power distribution of U.P.S to various Life- supporting & therapeutic equipments.
· Management of Company's customer support & A.M.Cs.
ADDITIONAL INFORMATION:
Training Undergone:
1. Network theory of Monitors, Modules & telemetry by Space labs Inc USA at New Delhi.
2. Technical training of Fresenius Dialysis Machines at Muscat.
3.Technical training of Baxter Althin machines at Muscat.
انشر على فيسبوك
انشر على تويتر
مشاركة عبر البريد الإلكتروني