Syarli Wellman

Client: Summit And Excelerate
Project Involve: Moheshkhali Floating LNG Project
Location: Bangladesh Offshore
Installation pipeline for floating LNG

Main Responsibilities:
 Carry out welding inspection on offshore pipelay vessels CRC-Evan semiautomatic Welding System STT welding process and FCAW used for mainline welding.
 Pre weld inspection, pre heat check, welding parameter recording, visual inspection
 Prepare inspection reports
 Reviewed NDT automated UT Report
 Ensuring that contractors implement quality control activities in accordance with contract specifications and agreed Inspection and test Plans.
 Carried out Welder Qualification Test

Client: PRPC Refinery and Cracker Sdn. Bhd
Project Involve: RAPID SCC Project, Cryogenic Pipe Support
Location: PT. BINDER INDONESIA, Tambun, Indonesia
Fabrication of Cryogenic Pipe Support (Cradle)

Main Responsibilities:
 Carry out inspection on Cradle support and High Density PUF
 Monitor progress
 Reviewed inspection reports
 Reviewed NDT UT, MT/PT Report
 Issued Pre_IRN for
 Ensuring that contractors implement quality control activities in accordance with contract specifications and agreed Inspection and test Plans.

1. Client: ONGC (Oil And Natural Gas Corporation Limited)
Location : Offshore India


Project Involved:
1.1 Daman Development Project
Installation of 12 inch, 10 Inch Carbon Steel Pipeline

1.2 C26-Cluster Pipeline Project
Installation of 16 inch CRA pipeline,

2. Client: TOTAL AUSTRAL
Project Involved: VEGA PLEYADE OFFSHORE PROJECT
Location: Offshore Argentina

3. Client: PTTEPI
Project Involved: ZAWTIKA DEVELOPMENT PROJECT - PHASE 1A
Location: Kanbauk, Myanmar

4. Client TOTAL E&P INDONESIE
Project Involved: Pipeline Sisi Nubi 2B and Peciko 7B Development Project EPCI (3+4)
Location: Balik Papan, Sisi Nubi field Offshore

5. Client: Pearl Oil
Project Involved: Pipeline Installation and Testing For Ruby Field Development Project (Pre-Commissioning)
Location: Senipah, Balikpapan, Indonesia

6. Client: Pertamina Hulu Energy (PHE WMO)
Project Involved: PPP Hook Up modification Platform
Location:
1. Lamongan Shore Base, Lamongan East Java, INDONESIA
2. West Madura Offshore, Poleng Process Platform, INDONESIA
Vessel: Labuhan

Main Responsibilities:
 Carry out welding inspection on offshore pipelay vessels for various diameter shallow water projects. Serimax automatic welding system (GMAW Process) And CRC-Evants automatic Welding System used for mainline welding.
 Carried out camera inspection on root for CRA Pipeline
 Pre weld inspection, pre heat check, welding parameter recording for fabrication of spools and structural welding using process such as SMAW, FCAW, GTAW.
 Prepare inspection reports
 Reviewed NDT test graph and reports per project requirement (RT, UT, MPI, PT, UT Pashed array and automated UT Report)
 Pipe mill inspection to make sure all pipes meets the requirements of pipe ovality, straightness, require thickness, etc.
 Material inspection, make sure the materials used are according to the specification and drawings
 Coordinate with NDT teams to carried out NDT after welding for onshore and offshore activity
 Implement site surveillance activities to verify compliance with specification requirement.
 Run welding procedure qualification, marking of test specimen for mechanical testing, witnessing cutting machining and mechanical testing
 Carried out inspection for Welder Qualification Test
 Monitoring all fabrication of Hook up Piping and Modification Deck Extension.
 Ensuring that contractors implement quality control activities in accordance with contract specifications and agreed Inspection and test Plans

Client: Exxon Mobile CEPU Ltd
Project Involve: Banyu Urip EPC1 Project
Location: Bojonegoro, Indonesia

Client: Caligari Petronas
Project Involve: Booster Cakrawala Platform, Jacket Installation
Location: Offshore Malaysia

Client: Dien Dong Petroleum Operating Company
Project Involved: Dien Dong 1 Development Project
Phase: CRA material for Manual Welding Double Joint Fabrication

Location: SAIPEM INDONESIA, Karimun Base,
Vessel: SEMAC1
Main Responsibilities:
 Monitoring fit-up as per procedure before welding and check randomly during welding then visual inspection for complete weld.
 Monitoring before, during and after welding
 Prepared, Welding Surveillance Report, Welding visual report, NDT Request for Pipe has been Cut out and rebeveling
 Monitor Running PQR

Project Involved: Epic of Block 4 Risers Platform & Submarine Pipelines, Topside Piping Installation
Client: Dragon Oil Turkmenistan Ltd

Location: Caspian Sea Turkmenistan, Offshore, Dubai Office
Main Responsibilities:
 Prepared welder list and welder certificates for approval by TPA
 Prepared pipe tally sheet, Welding visual report, Welding summary sheet
 Monitoring beveling, insert buckling detector, welding process using automatic GMAW, SMAW and GTAW
 Carried out visual inspection and monitoring NDE activities
 Coordinated with NDT team
 Monitor NDT Result (AUT, Manual UT and Magnetic Particle Test)
 Create Inspection Form
 Set up welding traceability
 Preparation and maintenance of quality control reports and records
 Reviewed all inspection record/report for Manufacturing Data Report (MDR) from Subcontractor.
 Release RFI (Request for Inspection) and Coordinated with TPA
 Prepare regular welding progress to Management
 Identifying quality problems providing the company execution team with recommended corrective and preventive actions

Fabrication: Mahshahr Pipe Protection Co, (MPPC), Iran
Main Responsibilities:
 Monitor all process concrete coating pipe comply with Client’s Spec and MTO
 Ensuring that contractors implement quality control activities in accordance with contract specifications and agreed Inspection and test Plans
 Review and make sure all documents (inspection report/test reports) signed by ROSSON/DOTL TPA
 Review Concrete coating pipe Tally sheet

Project Involved: SHWE Jacket and Piles Fabrication Project
Fabrication: Shenzhen Chiwan Sembawang Eng. Co. Ltd, Shenzhen - Guandong, P.R of China
Main Responsibilities:
 Overseeing the construction of site work.
 Ensuring that contractors implement and complying quality control activities in accordance with contract specifications and agreed Inspection and test Plans
 Check and verification the welding consumable as per WPS, aware toward wind /weather during yard welded, it’s shall be cover at welded area by habitat to avoid porosity.
 Monitoring fit-up as per procedure before welding and check randomly during welding then visual inspection for complete weld.
 Monitoring UT-TKY that performed by technicians and Interpret the film radiography for primary and secondary members
 Discuss with high authorized position if found nonconformance production during fabricated
 Ensuring that all work activities are carried out in a safe manner and preventing unsafe working
 Implement site surveillance activities to verify compliance with specification requirement.
 Day to day quality surveillance of the contractor work
 Review of NDE records including radiographs
 Reviewed and signed all Dimensional, welding, NDT reports, Inspection Release Notice, Final Documents
 Provide inspection and status reports as required.

Position: Seconded by CBI Clough Pte Ltd JV as Pipe Mill Inspector for Steel Piling Pipes
Manufactures: PT. KHI Pipe Industries
Main Responsibilities:
 Have to inspect pipe pile with 610mm x 12.7mm x 12M, 457mm x 12.7mm x 12M, 324mm x 12.7mm x 12M and their accessories (cover plate, stopper, backing rings) for SAW process and rest coated with Interzone 485
 Reviewed Manufacture Procedures Specification, reviewed and signed manufacture’s quality Inspection Report, QC Traceability, Pipe Tally sheet, Inspection Certificates, and issued IRN (Inspection Release Note).
 Monitor manufacture’s quality systems, records and quality personnel for compliance with requirements.
 Inspect randomly/witnessed and conduct the surveillance Inspections each pipe fabricated
 Ensured all the piling pipes and their accessories meet according to the PO and with specification before issued IRN

Manufactures: PT. KHI Pipe Industry, PT. Bumi Kaya Steel Industry and PT. Bakrie Pipe Industries
Customer: CS Pipeline South Sumatra NGL Project (PERTAGAS).
Main Responsibilities:
 Have to Inspect pipe Mill 8.625” OD x 6.35 mm WT DRL API 5L Grad B PSL2 for ERW Processed inspection.
 Reviewed Manufacture Procedures Specification, reviewed and signed manufacture’s quality Inspection Report, QC Traceability, Pipe Tally sheet, Inspection Certificates, MDR.
 Monitor manufacture’s quality systems, records and quality personnel for compliance with requirements.
 Witnessed and conduct the surveillance Inspections each pipe fabricated
 Have to tested and ensured the member’s fabrication has compliance with project specifications.
 Witnessed Mechanical Test (Tensile and Flattening Test), Chemical Analysis Test, Charpy Impact Test, Automatic Ultrasonic Test, Ultrasonic Test Manual.
 Witnessed the Prequalification Test, etc

Project Involved: Trunk Line Pipeline Inspection and Assessment of PT. PERTAMINA EP
Main Responsibilities:
 Have to inspection and assessment trunk-line pipeline of PT. PERTAMINA EP.
 Inspected by visual inspection to determine the condition of the outside of the pipeline, painting, coating systems, and pipe support, check for signs of misalignment, vibration, and leakage.
 Checked the thickness measurement pipeline to determine internal condition and remaining thickness of the pipeline condition.
 Soil inspection with soil test equipment and environment survey.
 Have to make daily reports day by day and submitted to Supervisor

Project involved: Bangko Gathering Station Upgrade, Installed 2 new Gasboots and 1 Separator including piping system
Main Responsibilities:
 Have to maintain the quality of the works of contractor, including safety at the field and performance of the workmanship, have responsibility to reported directly to Chevron’s Project Engineer and Construction Representative.
 Together with the CPI's representative and the contractor do tail gate meeting, sign work permit and site visit each would begin to work every morning.
 Ensured the job areas and surroundings are safe and ensured all employees working with safety and aware about safety regulation.
 Has responsibility to review all Contractor’s quality manual procedure and study client technical Specification and requirement drawing, work permit, material report, welding report, NDT report that will be used in project and monitor all work to make sure that all activities of contractor according with the CPI’s Spec, contractor quality manual procedure, drawing and also work permit (GWP = General Work Permit, Hot Work Permit, Standard Operation Procedure).
 Monitor and witnessed any inspection test according the ITP (Inspection Test Plan), all activities works at site and fabrication. Inspected receiving material and reviewed traceability reports.

Project involved:
 Seruni and Bekasap Wash Tank Repair
 Line Pipe replacement
 Put Of Production (POP)
 Pipeline Installation from wellhead to gathering station
 Service & Maintenance
Main Responsibilities:
 Follow the procedure at all activities such as; planning, controlling and monitoring for the execution of welding performance at site and the fabrication.
 Perform visual inspection before, during and after all welding work, prepare all requests for NDT after completed joint to be welded and submit to verification to the client.
 Prepare any requirement documents before, during, after commenced the Test such as procedure, material certificates, welding report, NDT report, etc. and then submit to the client for approval.
 Perform various inspections and witnessed by clients, such as Radiographic Test, Hydrotest, leaking test, pigging test.
 Witnessed Welder Qualification Test and running Procedure Qualification Record.
 Ensured the job areas and surroundings are safe and ensure all employees working with safety and aware about safety regulation.
 Involve in project maintenance, monitor and witnessed pipe leak repairing and shutdown progressed

Project involved: South Sumatra - West Java Gas Pipeline Project Phase II Omshore Gas Pipeline Muara Bekasi - Rawa Maju
Main Responsibilities:
 Review all NDT procedures, reviewing Radiography Test film, witnessed performing NDT for golden joint (UT, PT, and RT), review pipe book tracking report.
 Witnessed the pigging, hydro test, witnessed drying and purging using Nitrogen for pre commissioning and commissioning pipeline.
 Ensured the job areas and surroundings are safe and ensure all employees working with safety and aware about safety regulation.

Project Involved: BP (British Petroleoum) Berau Tangguh Gas production Facilities Project

Main Responsibilities:
 Witnessed Welder Qualification Test and running Procedure Qualification Record for Jackets and top side Platform (6-GR Position).
 Have to check the procedure and client specification according dimensional, welding, NDT and heat treatment required at each members structural
 Have to perform the dimensional check for bevelling TKY welded on tubular for jackets fabrication and other primary structural members.
 Conform to Engineering Drawing for every fabrication activities and counter check the material specification, weld configuration as per weld symbol, percentage NDT to be done.
 Check and verification the welding consumable as per WPS, aware toward wind /weather during yard welded, it’s shall be cover at welded area by habitat to avoid porosity.
 Perform fit-up as per procedure before welding and check randomly during welding then visual inspection for complete weld and then release the NDT request to NDT technicians.
 Monitoring UT-TKY that performed by technicians and Interpret the film radiography for primary and secondary members
 Discuss with high authorised position if found non conformance production during fabricated
 Report for fit-up and visual inspection for every structural activities and refer to weld map as reference joint number
 Collect all Dimensional, welding and NDT reports as as-built dossier


Project Involved: BP (British Petroleum) Berau Tangguh Gas production Facilities Project

Main Responsibilities:
 Have to check the procedure and client specification according piping item and isometric drawing, welding and NDT required
 Perform visual inspection for before, during, and after welding for piping duplex spool, monitor all welding repair if any according to the Client’s Specification and WPS.
 Prepare quality records and final acceptance document where required. Maintain records of relevant inspection activities.
 Ensure welding activity and check welding parameter during welding according WPS.
 Ensure code and standards relevant with activity fabrication, piping duplex assembly spools, ensured dimensional prior welding and post welding.
 Perform final inspection prior and release with client. Conducted daily audit for welding consumables in site storage and welding machine, ensured that welding traceability is recorded, prepare and submitted for welding report for client approval.
 Ensured the job areas and surroundings are safe and ensure all employees working with safety and aware about safety regulation.

Project Involved: Pipe mill for 32” API 5 L X-52 PSL-2 South Sumatra - West Java Gas Pipeline Project Pagardewa - Labuhan Maringgai

Main Responsibilities:
 Involved all inspection in manufacturing spiral pipe, performed visual and dimensional inspection, Welding Repair Inspection, Final Inspection (Visual and dimensional, DPT on Bevel, Residual Magnetism, Bevel Inspection, Bevel Protection, Marking).
 Interpreted radiography test Film and prepare RT report for submitted to the client, ensured all pipe have conducted NDT and the NDT reports approved by client before MDR Perform final inspection prior to release with client.
 Recommended by Client (GL-Nusantara Supervisor) to traced and closed NCR and MDR (Manufacture Daily Record) problems

Main Responsibilities:
 Have to check p’WPS and conform to Welding Engineer according weld consumable, and whom to be welded
 Witnessed the Welding Procedure Qualification Test and Welder Performance Qualification Test as structural welded with various welding position for flat and tubular
 Review Material Certificate, Review Welder document report, Issued PQR (Performance Qualification Record) to client and MIGAS and submit all documents for certification such as WPS and welders certificate
 Witnessed Mechanical Test for Procedure Qualification Test and Welder Performance Qualification test then result refer to code, standard and client procedure
 Have to interpreted film radiographic test and reviewed the reports

Main Responsibilities:
 To verified purchase order (PO) of materials and weld consumables for use in fabrication and inspection requirements.
 Verify material incoming and outgoing such as; check condition the material by visual inspection, dimensional inspection, type of material’s and refer to mill certification of materials.
 Verify weld joint preparation, visual test before and after welded and witnessed NDT inspections such as magnetic particle test, dye penetrate test, ultrasonic test.
 Record and report to main contractor.