Lead Mechanical Proposal engineer
Alghanim International
Total years of experience :21 years, 10 Months
Lead Proposal Engineer (Mechanical)
M/s Alghanim International Co. Kuwait
• For Sabiya Stage 3 tender No. MEW/54 - 2014/2015 -Supply, Erection, Operation and Maintenance of combined cycle Gas Turbine to Upgrade Power Capacity by 750 MW at Sabiya power And Desalination Plant (Awarded)
Review of the MEW technical specification for the HVAC and Fire Fighting package.
Developing the bill of quantity and data sheet for both package.
Obtaining and Evaluation of suppliers offers, sort listing and finalizing the best techno-commercial offers/ prices/ proposal.
prepare the ring main for fire fighting system as per project plot plan and estimate the lenght of the pipe and equipment required.
Estimate the final cost for both package.
• Al-Abdaliyah Integrated Solar Combined Cycle (ISCC) project. (Retenderd)
Review of technical specification for the project
Review / preparation of RFP for Fuel supply facilities/ pipeline consultant
Overall coordination for providing EPC bid from Alghanim side including cordination internally with team members, with EPC partners, consultants and client for bid
Obtaining offer from the suppliers and Evaluation, sort, listing and finalizing the best techno-commercial offers/ prices/ proposal.
Estimation for the final price for whole project to discuss with EPC partners.
• CTC Tender No. RFP-228832, 3 No's of 11KV substations B4, B5, MG2 inside KOC. (Second lower)
Review of technical Mechanical specification for the project
Review / preparation of RFP for Pipeline Road crossing, Fire suppression system, Fire alarm & Gas Detection system and HVAC system.
Overall coordination with team members, for other scope of work for providing the required bid documents including cordination with consultants and client for bid.
Obtaining offer from the suppliers / subcontractor and Evaluation, sort, listing and finalizing the best techno-commercial offers/ prices/ proposal.
Estimation for the final price for the Mechanical scope of work.
• Sabah Al-Ahmad Sea City Phase A5 Sewage Treatment Plant La’ala Al Kuwait Real Estate CO. K.S.C. (Awarded)
• Sabah Al-Ahmad Sea City Phase A1 Sewage Treatment Plant Expansion La’ala Al Kuwait Real Estate CO. K.S.C. (Awarded)
• Dubai Electricity & Water Authority (DEWA) tender RFx-No.: 2131600070 Aweer Power Station ‘H’ phase IV in Dubai, U.A.E.
• OMAN Marafiq, Duqm Integrated Power and Water Plant (“DIPWP”) Project Tender No: CUC-RFQ-4-001.
• Supply, Erection, Operation and Maintenance of Gas Turbines to Upgrade Power Capacity at Sabiya Power & Distillation Plant Site - Stage 2 CONTRACT No. MEW/C/4957/2015/2016
Managed an interface between Mechanical Engineering, Manufacturing, Sourcing and Quility Engineering.
Provide technical support to external design resources, equipment vendors, and fabricators
Supporting the design, fabrication, and installation of skid-mounted and stand-alone the main equipment (Gas turbine and Generator package, Fuel Gas System and Gas Oil System) and packaged process equipment consisting of piping, control valves, instruments and structural steel.
Review and approve fabricator and external design drawings, documentation and fabrication sequence
Provide proposal support by reviewing client specifications and requirements and providing expertise insetting strategy for product offerings
To supervise and manage all Quality Control and Assurance QA/QC functions in the workshop and manage a team of QC inspectors.
•Senior QA/QC Engineer (Mechanical),
M/s Alghanim International Co. Kuwait
• Supply, Erection, Operation and Maintenance of Gas Turbine to Upgrade Power Capacity at Az-Zour South power And Desalination Plant Site Co-Ordination with Siemens AG Energy.Contract No.: MEW/C/4609 - 2013/2014
To supervise and manage all Quality Control and Assurance QA/QC functions in the workshop and manage a team of QC inspectors.
Inspection of the heavy equipmentsusing in Gas Oil Treatment System, Fuel Gas Conditioning System, Fuel Gas Compressor, Demineralization Water Plant, Service Water Pumps and Potable Water Pumps. With vendors like BILFINGER, SINERGIA and VEOLIA.
Inspection activities for GAS TURBINE type SGT5-4000(F), GENERATOR type SGEN-2000H and AIR INTAKE SYSTEM as per FQP of manufacture.
Responsible for precommissioning test included system integrity and completeness including welding inspections.
Compilation of asbuilt documents including completion certificates.
Closing all the ECC and TOC punch items issued by MEW to obtain the final certificate.
Preparation of Final QC dossier for handing over to the client and maintain proper filing system (as per Organization procedure) with full traceability for retrieving the document.
Project: AZ-ZOUR South R.O. Desalination Plant with Re-carbonation System (30 MIGPD) With O&M Services. With Veolia Water Solutions & Technologies. Contract No.: MEW/C/4244 - 2010/2011
Preparation of Procedures.
Preparation WPS, PQR and procedure qualification.
Preparation and Submission of Project Quality Plan and Inspection Test Plan (ITP).
Preparation of Method Statement for Individual Activities.
Preparation of Surface Preparation and Painting Procedure.
Daily Field Inspection Activities.
Witnessing / Verifying DPT, Review of Radiography interpretation
Welder Qualification
Inspections of Piping fit-up and weld visual, NDT, Hydro test.
Conduct routing inspection on GRP Pipe line fit up and lamination activity.
Conduct routing inspection on HDPE pipe line welding activity.
Conduct routing inspection on Stainless Steel & Duplex Steel pipe line welding activity.
Preparation of Final QC dossier for handing over to the client and maintain proper filing system (as per Organization procedure) with full traceability for retrieving the document.
Piping Engineer & Material Engineer
M/s Alghanim International Co. Kuwait
• Project: Engineering, Procurement, Construction, Operation and Maintenance of Combined Cycle Gas Turbine Project at Sabiya Power Station.
Construction and erection of 40 inch GRP piping for Cooling Tower building No# 1 & 2 included interconnection piping for pump stations.
Construction and erection interconnection pipline up ti 24 inch sizing between new power plant project and tie in point for fuel gas system and Gas oil system.
Checking of piping and vendor drawings in accordance with the specs. and codes.
Involved in quantitative material verification for pipes and accessories such as gaskets, valves, bolts, elbows, tees etc. for all areas.
Checking project scope of work and required input data for all engineering activities.
Consulting and negotiating with client to prepare job specifications and present engineering drawings and documents.
Coordinating among Engineering, Procurement and Construction departments.
Scheduling material and equipment purchases and delivery.
Estimate quantities and cost of materials, equipment, and labor to determine project feasibility.
Pipline Project Engineer
M/s Al-Muntasar National Co.
• For Heavy Engineering Industries &Shipbuilding Co, Contract No. ME-EW/3466-2006/2007, procurement, construction and commissioning of HFO Pipelines from MAA Refinery to DWPS under Kuwait Oil Company (KOC)
Developing and directing project plans with the Engineering Project Manager (e.g. project budget, schedules, and change management requirements etc.)
Preparing and reviewing piping specifications in accordance with the company standardsand general codes (full awareness of KOC standards).
Preparing and reviewing valves datasheets vendor technical specification and bidders’ quotation.
Responsibility for monitoring piping construction and fabrication activities insuring qualityand taking necessary actions to maintain satisfactory standards.
Preparing work packages with all design documentations and method statement for work permits approval
Producing documentations required for field testing including hydrotest diagrams testcertificates mechanical completion certificates (MCC)
Witnessing all field tests including hydrotest (HT) dye Penetrante (PT) ultrasonic test (UT)Reviewing all site work and prepare the punch list for the construction
Wittiness for the civil work included mechanical excavation, dewatering & shoring for the deeper areas and micro tunneling for the main roads for passing the pipe.
Prepare or present public reports, such as bid proposals, deeds, environmental impact statements, and property and right-of-way descriptions to unload the pipeline and joint work.
Meet with the General contractor to keep the project on time and on budget.
Piping & Infrastructure Maintenance Engineer
Elmkhyal Combined Group co, For Parco Co, trading & contracting.
• Project, General maintenance of roads and squares Kuwait Farwaniya governorate Contract No. ق ص / ط/ 164 For Ministry of Puplic work
Study of variation orders and claims related to drainage system and water supply piping.
Reviewing of Particular Specification, Particular conditions, and Schedule of rates for maintenance work related to the project.
Created Tie-ins details using existing drawings and field verification.
Prepared and Reviewed Material Take off (MTO).
Preparing work packages with all shop drawings and method statement for work permits approval
Assisting technical staff in resolving field problems.
Bashay Steel Egypt
Quality Control and Material Inspector Engineer
Job Description
Inspection of the received shell plate, heads, nozzle pipe, forged flange, fitting material
Check the fit up of shell course (misalignment & roundness & straightness).
Visual check for longitudinal & circumferential welds.
Check the layout-opening nozzle according to approved drawing.
Final visual & dimension check, ultrasonic thicknesses check.
Witness for NDT, PWHT, and Hydrostatic test.
Sohag Engineering Consultations Office, Egypt
Construction Engineer
As Consulting engineer for roods and surveying works
Job Description
Prepare and maintain sketches, maps, reports and legal description of surveys in order to describe, certify and assume liability for work performed.
Verify the accuracy of survey data, including measurements and calculations conducted at survey sites
Direct or conduct surveys in order to establish legal boundaries for properties, based on legal deeds and titles.
Record the results of surveys, including the shape, contour, location, elevation, and dimensions of land or land features.
Calculate heights, depths, relative positions, property lines, and other characteristics of terrain.
Prepare or supervise preparation of all data, charts, plots, maps, records, and documents related to surveys.
Certificate no, 69698
Ventilation design project of underground section of Alexandria Regional metro line 2001- 2002 With Excellent Grade
