Total Years of Experience: 20 Years, 2 Months
October 2012
To Present
Reliability Engineering Consultant
at MERIDIUM
Location :
United Arab Emirates - Dubai
To provide Reliability engineering consulting services for Meridium clients within Middle East, North Africa and Eastern Europe.
To participate in the improvement initiatives for Meridium solution package.
To provide RCM, Reliability Analytics, Asset Strategy Management and Asset Strategy Implementation Training sessions and workshops.
To facilitate RCM and FMEA implementation at client sites.
To participate in the improvement initiatives for Meridium solution package.
To provide RCM, Reliability Analytics, Asset Strategy Management and Asset Strategy Implementation Training sessions and workshops.
To facilitate RCM and FMEA implementation at client sites.
February 2011
To October 2012
Reliability Engineering Section Head in the R&D Sector in the Asset Integrity Management department.
at Egyptian Maintenance Company
Location :
Egypt - Alexandria
- To apply RCM II according to SAE JA1012 in the oil and gas field according to client request.
- To innovate a Reliability management system software package and validate it through case studies.
- To prepare and instruct RCM and Reliability training courses for engineers and staff to create a Reliability culture and to build EMC-RCM team.
- To innovate a Reliability management system software package and validate it through case studies.
- To prepare and instruct RCM and Reliability training courses for engineers and staff to create a Reliability culture and to build EMC-RCM team.
October 2010
To February 2011
RCM Consultant in Abu Dhabi Company for Onshore Oil Operation (ADCO) RCM project at ASAB filed.
at Meridium (supplied from Egyptian Maintenance Company to MERIDIUM Company)
Location :
United Arab Emirates - Abu Dhabi
- To provide RCM training for ADCOs employees.
- To facilitate RCM analysis in order to create operating context document, Functional block diagram according to IDEF and FMECA.
- To generate optimized maintenance plan according to RCM analysis results.
- To load the analyses into MERIDIUM RCM software module.
- To show the failures which have occurred and are documented in ADCOs CMMS.
- To provide reliability analytics by showing trending of equipment MTBFs.
- To provide Weibull or other distribution analyses to illustrate any likely reliability behavior that the CMMS data can confirm/deny.
- Assist in providing illustration of other MERIDIUM content support which can aid in making RCM decisions.
- To facilitate RCM analysis in order to create operating context document, Functional block diagram according to IDEF and FMECA.
- To generate optimized maintenance plan according to RCM analysis results.
- To load the analyses into MERIDIUM RCM software module.
- To show the failures which have occurred and are documented in ADCOs CMMS.
- To provide reliability analytics by showing trending of equipment MTBFs.
- To provide Weibull or other distribution analyses to illustrate any likely reliability behavior that the CMMS data can confirm/deny.
- Assist in providing illustration of other MERIDIUM content support which can aid in making RCM decisions.
March 2008
To October 2010
Senior Reliability Engineer in the global Maintenance department
at EMC
Location :
Egypt - Alexandria
- To insure the correct implementation of ISO14224:2006 " collect and exchange of reliability data " and IEC60863.
- To establish an adequate reliability program and perform appropriate analysis and tasks to produce asset optimization strategies to ensure the safe and reliable operation of the facilities according to IEC60300-3-11 and MIL-STD-2173.
- To utilize plant/equipment failure data and carry out root cause analysis (RCA), failure mode and effect analysis (FMEA), Weibull probability plot and another industry accepted reliability techniques in order to identify the root causes of failures which can facilitate implementation of adequate corrective and preventive actions to improve the Reliability and Availability of the plant.
- To establish an adequate reliability program and perform appropriate analysis and tasks to produce asset optimization strategies to ensure the safe and reliable operation of the facilities according to IEC60300-3-11 and MIL-STD-2173.
- To utilize plant/equipment failure data and carry out root cause analysis (RCA), failure mode and effect analysis (FMEA), Weibull probability plot and another industry accepted reliability techniques in order to identify the root causes of failures which can facilitate implementation of adequate corrective and preventive actions to improve the Reliability and Availability of the plant.
January 2007
To March 2008
Reliability testing Engineer in the electrical testing lab
at Bureau Veritas
Location :
Saudi Arabia - Jeddah
- To assure the reliability and safety of different electrical appliances through testing.
- To calculate and monitor uncertainty in measurements through six sigma principles.
- To supervise the correct use of the modern automatic testing standard equipment.
- To test and certify information technology equipment according to IEC 60950:2005.
- To test and certify electronic apparatuses according to IEC 60065:2005 standards.
- To test and certify household appliances according to IEC 60335:2005 standards.
- To test and certify luminaires according to IEC 60598:2003 standards.
- To test and certify AC-supplied electronic ballasts for tubular fluorescent lamps according to IEC 60929:2003 standards.
- To test and certify Ordinary television receivers according to GS 965/6:1997 standards.
- To test and certify Plugs and socket-outlets for household and similar general use according to SASO 2203/4:2003 standards.
- To test and certify Ballasts for tubular fluorescent lamps according to IEC 60921:2004.
- To test and certify Lead-acid starter batteries according to IEC 60095:2006 standards.
- To test and certify Lamps according to IEC 60064, 60432, 60188, 60968, 61167, 61199/5.
- To test and certify Degrees of protection provided by enclosures (IP code) according to IEC 60529:2001 standards.
- To test and certify electrical installations according to the proper specific standards.
- To calculate and monitor uncertainty in measurements through six sigma principles.
- To supervise the correct use of the modern automatic testing standard equipment.
- To test and certify information technology equipment according to IEC 60950:2005.
- To test and certify electronic apparatuses according to IEC 60065:2005 standards.
- To test and certify household appliances according to IEC 60335:2005 standards.
- To test and certify luminaires according to IEC 60598:2003 standards.
- To test and certify AC-supplied electronic ballasts for tubular fluorescent lamps according to IEC 60929:2003 standards.
- To test and certify Ordinary television receivers according to GS 965/6:1997 standards.
- To test and certify Plugs and socket-outlets for household and similar general use according to SASO 2203/4:2003 standards.
- To test and certify Ballasts for tubular fluorescent lamps according to IEC 60921:2004.
- To test and certify Lead-acid starter batteries according to IEC 60095:2006 standards.
- To test and certify Lamps according to IEC 60064, 60432, 60188, 60968, 61167, 61199/5.
- To test and certify Degrees of protection provided by enclosures (IP code) according to IEC 60529:2001 standards.
- To test and certify electrical installations according to the proper specific standards.
January 2004
To January 2007
Reliability Engineer in the R&D group.
at LG Electronics
Location :
Egypt
- KPI (Key Performance Index) setting and monitoring through six sigma principles for different work groups.
- Manage, coach and evaluate six sigma improvement projects in different work groups.
- Prepare and instruct six sigma training courses for engineers and staff.
- Maintain company ISO9001:2000 certification through auditing as a senior internal auditor.
- Control process variations and analyze quality problems through Six Sigma philosophy.
- Supply chain quality management and control through auditing and evaluation activities.
- Assure the quality of all received components through building and maintain inspection system to assure the final product reliability.
- Perform reliability testing and evaluation for new developed items.
- Control overseas suppliers through quality agreements and quality target agreements.
- Prepare quality closing reports through my strong reporting and presentation skills (LPR, SDR, PDR calculation and quality cost analysis).
- Use ERP system to register all data related to Job procedures.
- Follow up line patrol audit, T5S activities and RoHS (Restrictions of Hazardous Substances) situation.
- Manage group of technicians, inspectors and workers.
- Collect marketing, warehouse, custom clearance and material data then create monthly production plan.
- Manage, coach and evaluate six sigma improvement projects in different work groups.
- Prepare and instruct six sigma training courses for engineers and staff.
- Maintain company ISO9001:2000 certification through auditing as a senior internal auditor.
- Control process variations and analyze quality problems through Six Sigma philosophy.
- Supply chain quality management and control through auditing and evaluation activities.
- Assure the quality of all received components through building and maintain inspection system to assure the final product reliability.
- Perform reliability testing and evaluation for new developed items.
- Control overseas suppliers through quality agreements and quality target agreements.
- Prepare quality closing reports through my strong reporting and presentation skills (LPR, SDR, PDR calculation and quality cost analysis).
- Use ERP system to register all data related to Job procedures.
- Follow up line patrol audit, T5S activities and RoHS (Restrictions of Hazardous Substances) situation.
- Manage group of technicians, inspectors and workers.
- Collect marketing, warehouse, custom clearance and material data then create monthly production plan.
Share on Facebook
Share on Twitter
Share Via Email