Amer Ahmad Kafaween, Senior Civil Engineer

Amer Ahmad Kafaween

Senior Civil Engineer

AYESA

Location
Saudi Arabia - Riyadh
Education
Bachelor's degree, Civil Engineering
Experience
9 years, 8 Months

Share My Profile

Block User


Work Experience

Total years of experience :9 years, 8 Months

Senior Civil Engineer at AYESA
  • Saudi Arabia - Jeddah
  • My current job since August 2020

Senior Civil Engineer at AYESA consulting company
my duties are and not limited the below:
1- review the documents and materials.
2- Review the contractor invoice.
3- supervision the work and insure its done as per specification and drawings.
4- Acting as construction manager and supervisor for 7 engineers.
5- help contractor to finish the work as per plan time.
6- Raise NCRs and SOs if the work didn't done as per specification and critical issues.
7- send letters for contractor whenever its need.
8- Review the work inspection and material inspection.
9- attend the meetings with client and update him regarding the works.

project construction manager at AYESA
  • Saudi Arabia - Jeddah
  • My current job since February 2023
Cost Engineer at Consolidated Contractors Company
  • Saudi Arabia - Riyadh
  • October 2017 to August 2020
Coordinator Engineer at Consolidated Contractors Coompany (CCC) in Joint Venture name BACS
  • Saudi Arabia - Riyadh
  • April 2015 to September 2018

I am working in Concrete center support (Facilities support department) as a concrete coordinator engineer in BACS Consortium for all site in Riyadh Metro Project (RMP), the project have 85 stations, Viaduct Spans & depots.
my work is
1-coordinator between suppliers (Saudi Ready Mix (SRM), Al Falwa Ready Mix & BACS plant) to apply concrete and support sites in project for concrete work.
2- coordinate between Sites in project and provide plan to apply concrete on all sites in project without delay, we are take plan(weeks look ahead & 6 months look ahead) from delivery group and try to make the best plan to apply concrete regarding the plan.
3- account the quantities for all sites in project and each delivery group (Deep under ground, elevated stations ... etc.).
4- do trial mix for special concrete requested from sites and making approved from QC management to be ready for sites.

Concrete Coordinator Engineer at Consolidated Contractors Coompany (CCC) in Joint Venture name BACS
  • Saudi Arabia - Riyadh
  • March 2017 to September 2018

I am working in Concrete center support (Facilities support department) as a concrete coordinator engineer in BACS Consortium for all site in Riyadh Metro Project (RMP), the project have 85 stations, Viaduct Spans & depots.
my work is
1-coordinator between suppliers (Saudi Ready Mix (SRM), Al Falwa Ready Mix & BACS plant) to apply concrete and support sites in project for concrete work.
2- coordinate between Sites in project and provide plan to apply concrete on all sites in project without delay, we are take plan(weeks look ahead & 6 months look ahead) from delivery group and try to make the best plan to apply concrete regarding the plan.
3- account the quantities for all sites in project and each delivery group (Deep under ground, elevated stations ... etc.).
4- do trial mix for special concrete requested from sites and making approved from QC management to be ready for sites.

Site Engineer (Civil Engineering) at Consolidated contractors company
  • Saudi Arabia - Riyadh
  • April 2015 to September 2017

I am working in Riyadh Metro Project (RMP) is the greatest project in Kingdom Saudi Arabia (KSA).
I am working in Elevated stations departments in stations delivery group as a site engineer in four stations (1J2 station, 1G2 station, 1G1 station & 1H2 Station).

The elevated stations consisting of basement boxes, Mezzanine floor & Platform floor.


my work in department / station as the following:
1- check all drawing in site (IFC drawing, Field Sketch, Shop drawing ... etc.).
2- check the working in site it as drawings with safely procedure and good quality.
3- check the materials requested for site if it approved or no as a specifications.
4- coordinate with MEP (Mechanical, Electrical & Plumping) department to the work without double work from civil department and MEP departments.
5- request materials need it for station and double check if it as specification or no.
6- check the surveyor points in site by surveyor and drawings and make SWR (Survey work request)
7- make WIR (Work Inspection Request) for consultant (RMTC) to check the elements in site before do next step in work.
8- make good plan for station what is first priority requested in site to keep good progress (daily plan, weekly plan, 3 weeks look ahead plan & 6 months look ahead plan).
9- I was working in night shift approximately 8 months alone and I am looking for 3 stations progress, when I was working in night shift I coordinate with concrete suppliers, traffic management department and sites to apply concrete.
10- In Civil details in station: A) I was supervisor of concrete, scaffold, shuttering, carpentry work and steel work.
B) I was supervisor of subcontractor in site ( Star builders, SAVETO, CRETEC.. etc.)
C) I was supervisor of finishing work (Only block work and plastering)

civil engineer at Omar Abou Sa'ad
  • Jordan - Aqaba
  • November 2014 to February 2015

Civil Site engineer in Rest village project in Aqaba (360 KM south of Amman)

I was working as site engineer and responsible of two towers in rest village with another sr. site engineer

Civil Engineer at Greater Amman Municipality
  • Jordan - Amman
  • June 2014 to August 2014

Working as a trainee in Special Projects Department, which is one of the important departments in GAM.

Education

Bachelor's degree, Civil Engineering
  • at University of Jordan
  • August 2014

Grade : Good. I took several courses according to my study plan such as concrete and its lab, structure, highway & pavement, steel structure, survaying, Environmental engineer, remote sensing, numerical engineer, field techniques, engineering geology. My Graduate Research with Title “account quantities & cost project”.

Specialties & Skills

Cost Tracking
Building Commissioning
Site Engineering
civil engineer
Microsoft office
Leadership - Team Work
AutoCAD
management and coordination for small project
project management
soft skills
project control
ability to work under stress and emergency condition
cost control

Languages

English
Expert
Arabic
Native Speaker

Memberships

Cosolidated Contracors Company (CCC)
  • Construction copmany
  • April 2015

Training and Certifications

Oracle Primavera P6 Beginner and advanced levels Diploma (Training)
Training Institute:
professional Engineers
Date Attended:
May 2018
Duration:
16 hours
CCC Ethics and Anti-corruption (Training)
Training Institute:
Consolidated Contractor Company
Date Attended:
June 2018
Communication and Accountability (Training)
Training Institute:
BACS (Riyadh Metro Project)
Date Attended:
July 2017
Duration:
10 hours
SMART Goals (Training)
Training Institute:
BACS (Riyadh Metro Project)
Date Attended:
April 2017
Duration:
20 hours
Resolving Cinflict (Training)
Training Institute:
BACS (Riyadh Metro Project)
Date Attended:
July 2017
Duration:
10 hours
First Aid Provider Course (Training)
Training Institute:
American Heart Association
Date Attended:
May 2015
Duration:
10 hours
Basic cardiac life support provider course (Training)
Training Institute:
American Heart Association
Date Attended:
May 2015
Duration:
10 hours
Health, Safety and Environment leadership training (Training)
Training Institute:
BACS (Riyadh Metro Project)
Date Attended:
May 2015
Duration:
10 hours
PMP preparation course (Training)
Training Institute:
professional Engineers
Date Attended:
May 2018
Duration:
35 hours
Leadership training (Training)
Training Institute:
BACS consurtioum (HSE Safety center)
Date Attended:
July 2015
Duration:
30 hours
OSHA Safety Training (Certificate)
Date Attended:
July 2016
ENclosed AREA training (Training)
Training Institute:
Mohammad Akawi
Date Attended:
April 2015
Duration:
3 hours
Read Drawings (Training)
Training Institute:
University of Jordan - Training Center
Date Attended:
January 2014
Duration:
15 hours
Accounting Quantities (Training)
Training Institute:
University of Jordan - Training Center
Date Attended:
January 2014
Duration:
15 hours