Total Years of Experience: 10 Years, 1 Months
January 2018
To April 2019
QA QC Inspector (Mechanical , Piping & Welding)
at Tecnicas Reunidas
Location :
Kuwait - Al Zour Mina Saud
Duties and Responsibilities for Piping & welding:-
• Review project specification, ITP, QCP & all procedures to understand their scope and to prepare to carry out inspections to client Site construction procedure etc
• Inspection activities in MTC review, Welding procedures and welder qualifications, welding, NDE Testing, PWHT, , Radiographic film review, Dimensional Checks, Review of test packs and Hydrostatic testing, Air blowing, Independent quality integrity verification and documentation reviews.
• Monitoring over all welding in the field / workshop with respect to the correct usage and application of the WPS
• Carries out monitoring and final inspections as required by approved ITP & QCP.
• Preparation of daily welding reports & Welding summery.
• Witnessing of Weld repair activities as per Client approved WPS.
• Line walk and Punch List preparation before Hydro Test.
• Preparation and Reviewing of Hydro test packages.
• Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
• Reinstatement of piping systems after completion of all hydro testing activities.
• Verify contractor’s records of calibration, inspection & test equipment.
• Liaise with Project Engineers, PMC, Discipline Engineers, Vendor representatives and Company Technical focal points regarding inspection activities.
• Prepares of NCR’s for any disposition actions and monitor CA taken for close out.
Duties and responsibilities for Mechanical Equipments:
Review of QCP, ITP, Engineering drawings, Procedures and Method of statement for the project
My areas of expertise are Preservation, Installation, Inspection & Verification of Rotating Equipment, Static Equipment, Vessel Internals, Structural, etc.
Experienced in verification of ITP, QCP, Method Statements, NCR, etc for the Installation & Inspection of Equipment.
Installation & Inspection for Static Equipment include Padding, Elevation, Position, Orientation, Verticality, Levelness, Platform & ladder, Vessel Internal work, Leak Testing, etc.
Perform inspection "internal & external" and condition assessment of the existing plant stationary equipment, piping and structures.
Issue independent inspection report for the findings.
Develop independent technical repair procedures for plant related problems and ensure execution of the repair as per procedure.
Responsible for timely providing specialist engineering skills for plant problems such as study the root cause, analyze and recommend.
Prepare & issue technical inspection reports after site visits in the field for the plant equipment, piping and structures.
Ensuring timely executions of the inspection tasks as per company procedures, standards and schedules.
Prepare inspection list for the plant turnaround activities and attend vessel internal inspection and all plant turn around inspection activities including rotary equipment.
Daily routine inspection and coordination with client inspectors, for smooth and timely approval of inspection documents.
Providing technical information and guidance to construction to be pro-active on their respective area of concern.
Coordination with field engineering department to resolve construction & inspection related issues.
• Review project specification, ITP, QCP & all procedures to understand their scope and to prepare to carry out inspections to client Site construction procedure etc
• Inspection activities in MTC review, Welding procedures and welder qualifications, welding, NDE Testing, PWHT, , Radiographic film review, Dimensional Checks, Review of test packs and Hydrostatic testing, Air blowing, Independent quality integrity verification and documentation reviews.
• Monitoring over all welding in the field / workshop with respect to the correct usage and application of the WPS
• Carries out monitoring and final inspections as required by approved ITP & QCP.
• Preparation of daily welding reports & Welding summery.
• Witnessing of Weld repair activities as per Client approved WPS.
• Line walk and Punch List preparation before Hydro Test.
• Preparation and Reviewing of Hydro test packages.
• Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
• Reinstatement of piping systems after completion of all hydro testing activities.
• Verify contractor’s records of calibration, inspection & test equipment.
• Liaise with Project Engineers, PMC, Discipline Engineers, Vendor representatives and Company Technical focal points regarding inspection activities.
• Prepares of NCR’s for any disposition actions and monitor CA taken for close out.
Duties and responsibilities for Mechanical Equipments:
Review of QCP, ITP, Engineering drawings, Procedures and Method of statement for the project
My areas of expertise are Preservation, Installation, Inspection & Verification of Rotating Equipment, Static Equipment, Vessel Internals, Structural, etc.
Experienced in verification of ITP, QCP, Method Statements, NCR, etc for the Installation & Inspection of Equipment.
Installation & Inspection for Static Equipment include Padding, Elevation, Position, Orientation, Verticality, Levelness, Platform & ladder, Vessel Internal work, Leak Testing, etc.
Perform inspection "internal & external" and condition assessment of the existing plant stationary equipment, piping and structures.
Issue independent inspection report for the findings.
Develop independent technical repair procedures for plant related problems and ensure execution of the repair as per procedure.
Responsible for timely providing specialist engineering skills for plant problems such as study the root cause, analyze and recommend.
Prepare & issue technical inspection reports after site visits in the field for the plant equipment, piping and structures.
Ensuring timely executions of the inspection tasks as per company procedures, standards and schedules.
Prepare inspection list for the plant turnaround activities and attend vessel internal inspection and all plant turn around inspection activities including rotary equipment.
Daily routine inspection and coordination with client inspectors, for smooth and timely approval of inspection documents.
Providing technical information and guidance to construction to be pro-active on their respective area of concern.
Coordination with field engineering department to resolve construction & inspection related issues.
January 2015
To December 2017
QC Inspector Piping & Welding
at Kharafi National - Kuwait
Location :
Kuwait - Al Ahmadi
Duties and Responsibilities for Piping & welding:-
• Review project specification, ITP, QCP & all procedures to understand their scope and to prepare to carry out inspections to client Site construction procedure etc
• Inspection activities in MTC review, Welding procedures and welder qualifications, welding, NDE Testing, PWHT, , Radiographic film review, Dimensional Checks, Review of test packs and Hydrostatic testing, Air blowing, Independent quality integrity verification and documentation reviews.
• Monitoring over all welding in the field / workshop with respect to the correct usage and application of the WPS
• Carries out monitoring and final inspections as required by approved ITP & QCP.
• Preparation of daily welding reports & Welding summery.
• Witnessing of Weld repair activities as per Client approved WPS.
• Line walk and Punch List preparation before Hydro Test.
• Preparation and Reviewing of Hydro test packages.
• Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
• Reinstatement of piping systems after completion of all hydro testing activities.
• Verify contractor’s records of calibration, inspection & test equipment.
• Liaise with Project Engineers, PMC, Discipline Engineers, Vendor representatives and Company Technical focal points regarding inspection activities.
• Prepares of NCR’s for any disposition actions and monitor CA taken for close out.
Duties and responsibilities for Mechanical Equipments:
Review of QCP, ITP, Engineering drawings, Procedures and Method of statement for the project
My areas of expertise are Preservation, Installation, Inspection & Verification of Rotating Equipment, Static Equipment, Vessel Internals, Structural, etc.
Experienced in verification of ITP, QCP, Method Statements, NCR, etc for the Installation & Inspection of Equipment.
Installation & Inspection for Static Equipment include Padding, Elevation, Position, Orientation, Verticality, Levelness, Platform & ladder, Vessel Internal work, Leak Testing, etc.
Perform inspection "internal & external" and condition assessment of the existing plant stationary equipment, piping and structures.
Issue independent inspection report for the findings.
Develop independent technical repair procedures for plant related problems and ensure execution of the repair as per procedure.
Responsible for timely providing specialist engineering skills for plant problems such as study the root cause, analyze and recommend.
Prepare & issue technical inspection reports after site visits in the field for the plant equipment, piping and structures.
Ensuring timely executions of the inspection tasks as per company procedures, standards and schedules.
Prepare inspection list for the plant turnaround activities and attend vessel internal inspection and all plant turn around inspection activities including rotary equipment.
Daily routine inspection and coordination with client inspectors, for smooth and timely approval of inspection documents.
Providing technical information and guidance to construction to be pro-active on their respective area of concern.
Coordination with field engineering department to resolve construction & inspection related issues.
• Review project specification, ITP, QCP & all procedures to understand their scope and to prepare to carry out inspections to client Site construction procedure etc
• Inspection activities in MTC review, Welding procedures and welder qualifications, welding, NDE Testing, PWHT, , Radiographic film review, Dimensional Checks, Review of test packs and Hydrostatic testing, Air blowing, Independent quality integrity verification and documentation reviews.
• Monitoring over all welding in the field / workshop with respect to the correct usage and application of the WPS
• Carries out monitoring and final inspections as required by approved ITP & QCP.
• Preparation of daily welding reports & Welding summery.
• Witnessing of Weld repair activities as per Client approved WPS.
• Line walk and Punch List preparation before Hydro Test.
• Preparation and Reviewing of Hydro test packages.
• Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
• Reinstatement of piping systems after completion of all hydro testing activities.
• Verify contractor’s records of calibration, inspection & test equipment.
• Liaise with Project Engineers, PMC, Discipline Engineers, Vendor representatives and Company Technical focal points regarding inspection activities.
• Prepares of NCR’s for any disposition actions and monitor CA taken for close out.
Duties and responsibilities for Mechanical Equipments:
Review of QCP, ITP, Engineering drawings, Procedures and Method of statement for the project
My areas of expertise are Preservation, Installation, Inspection & Verification of Rotating Equipment, Static Equipment, Vessel Internals, Structural, etc.
Experienced in verification of ITP, QCP, Method Statements, NCR, etc for the Installation & Inspection of Equipment.
Installation & Inspection for Static Equipment include Padding, Elevation, Position, Orientation, Verticality, Levelness, Platform & ladder, Vessel Internal work, Leak Testing, etc.
Perform inspection "internal & external" and condition assessment of the existing plant stationary equipment, piping and structures.
Issue independent inspection report for the findings.
Develop independent technical repair procedures for plant related problems and ensure execution of the repair as per procedure.
Responsible for timely providing specialist engineering skills for plant problems such as study the root cause, analyze and recommend.
Prepare & issue technical inspection reports after site visits in the field for the plant equipment, piping and structures.
Ensuring timely executions of the inspection tasks as per company procedures, standards and schedules.
Prepare inspection list for the plant turnaround activities and attend vessel internal inspection and all plant turn around inspection activities including rotary equipment.
Daily routine inspection and coordination with client inspectors, for smooth and timely approval of inspection documents.
Providing technical information and guidance to construction to be pro-active on their respective area of concern.
Coordination with field engineering department to resolve construction & inspection related issues.
April 2012
To March 2014
QC Inspector (Welding , Piping)
at AL-HIDADA LIMITED
Location :
Saudi Arabia - Jeddah
Duties and Responsibilities for Piping & welding:-
• Review project specification, ITP, QCP & all procedures to understand their scope and to prepare to carry out inspections to client Site construction procedure etc
• Inspection activities in MTC review, Welding procedures and welder qualifications, welding, NDE Testing, PWHT, , Radiographic film review, Dimensional Checks, Review of test packs and Hydrostatic testing, Air blowing, Independent quality integrity verification and documentation reviews.
• Monitoring over all welding in the field / workshop with respect to the correct usage and application of the WPS
• Carries out monitoring and final inspections as required by approved ITP & QCP.
• Preparation of daily welding reports & Welding summery.
• Witnessing of Weld repair activities as per Client approved WPS.
• Line walk and Punch List preparation before Hydro Test.
• Preparation and Reviewing of Hydro test packages.
• Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
• Reinstatement of piping systems after completion of all hydro testing activities.
• Verify contractor’s records of calibration, inspection & test equipment.
• Liaise with Project Engineers, PMC, Discipline Engineers, Vendor representatives and Company Technical focal points regarding inspection activities.
• Prepares of NCR’s for any disposition actions and monitor CA taken for close out.
• Review project specification, ITP, QCP & all procedures to understand their scope and to prepare to carry out inspections to client Site construction procedure etc
• Inspection activities in MTC review, Welding procedures and welder qualifications, welding, NDE Testing, PWHT, , Radiographic film review, Dimensional Checks, Review of test packs and Hydrostatic testing, Air blowing, Independent quality integrity verification and documentation reviews.
• Monitoring over all welding in the field / workshop with respect to the correct usage and application of the WPS
• Carries out monitoring and final inspections as required by approved ITP & QCP.
• Preparation of daily welding reports & Welding summery.
• Witnessing of Weld repair activities as per Client approved WPS.
• Line walk and Punch List preparation before Hydro Test.
• Preparation and Reviewing of Hydro test packages.
• Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
• Reinstatement of piping systems after completion of all hydro testing activities.
• Verify contractor’s records of calibration, inspection & test equipment.
• Liaise with Project Engineers, PMC, Discipline Engineers, Vendor representatives and Company Technical focal points regarding inspection activities.
• Prepares of NCR’s for any disposition actions and monitor CA taken for close out.
January 2010
To January 2012
QC Inspector
at Bilfinger Neo Structo Pvt.ltd, India
Location :
India - Chennai
Duties and Responsibilities for Piping & welding:-
• Review project specification, ITP, QCP & all procedures to understand their scope and to prepare to carry out inspections to client Site construction procedure etc
• Inspection activities in MTC review, Welding procedures and welder qualifications, welding, NDE Testing, PWHT, , Radiographic film review, Dimensional Checks, Review of test packs and Hydrostatic testing, Air blowing, Independent quality integrity verification and documentation reviews.
• Monitoring over all welding in the field / workshop with respect to the correct usage and application of the WPS
• Carries out monitoring and final inspections as required by approved ITP & QCP.
• Preparation of daily welding reports & Welding summery.
• Witnessing of Weld repair activities as per Client approved WPS.
• Line walk and Punch List preparation before Hydro Test.
• Preparation and Reviewing of Hydro test packages.
• Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
• Reinstatement of piping systems after completion of all hydro testing activities.
• Verify contractor’s records of calibration, inspection & test equipment.
• Liaise with Project Engineers, PMC, Discipline Engineers, Vendor representatives and Company Technical focal points regarding inspection activities.
• Prepares of NCR’s for any disposition actions and monitor CA taken for close out.
• Review project specification, ITP, QCP & all procedures to understand their scope and to prepare to carry out inspections to client Site construction procedure etc
• Inspection activities in MTC review, Welding procedures and welder qualifications, welding, NDE Testing, PWHT, , Radiographic film review, Dimensional Checks, Review of test packs and Hydrostatic testing, Air blowing, Independent quality integrity verification and documentation reviews.
• Monitoring over all welding in the field / workshop with respect to the correct usage and application of the WPS
• Carries out monitoring and final inspections as required by approved ITP & QCP.
• Preparation of daily welding reports & Welding summery.
• Witnessing of Weld repair activities as per Client approved WPS.
• Line walk and Punch List preparation before Hydro Test.
• Preparation and Reviewing of Hydro test packages.
• Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
• Reinstatement of piping systems after completion of all hydro testing activities.
• Verify contractor’s records of calibration, inspection & test equipment.
• Liaise with Project Engineers, PMC, Discipline Engineers, Vendor representatives and Company Technical focal points regarding inspection activities.
• Prepares of NCR’s for any disposition actions and monitor CA taken for close out.
November 2008
To December 2009
QC Inspector
at Veesons Energy Systems Pvt Ltd
Location :
India - Chennai
Duties and Responsibilities for Piping & welding:-
• Review project specification, ITP, QCP & all procedures to understand their scope and to prepare to carry out inspections to client Site construction procedure etc
• Inspection activities in MTC review, Welding procedures and welder qualifications, welding, NDE Testing, PWHT, , Radiographic film review, Dimensional Checks, Review of test packs and Hydrostatic testing, Air blowing, Independent quality integrity verification and documentation reviews.
• Monitoring over all welding in the field / workshop with respect to the correct usage and application of the WPS
• Carries out monitoring and final inspections as required by approved ITP & QCP.
• Preparation of daily welding reports & Welding summery.
• Witnessing of Weld repair activities as per Client approved WPS.
• Line walk and Punch List preparation before Hydro Test.
• Preparation and Reviewing of Hydro test packages.
• Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
• Reinstatement of piping systems after completion of all hydro testing activities.
• Verify contractor’s records of calibration, inspection & test equipment.
• Liaise with Project Engineers, PMC, Discipline Engineers, Vendor representatives and Company Technical focal points regarding inspection activities.
• Prepares of NCR’s for any disposition actions and monitor CA taken for close out.
• Review project specification, ITP, QCP & all procedures to understand their scope and to prepare to carry out inspections to client Site construction procedure etc
• Inspection activities in MTC review, Welding procedures and welder qualifications, welding, NDE Testing, PWHT, , Radiographic film review, Dimensional Checks, Review of test packs and Hydrostatic testing, Air blowing, Independent quality integrity verification and documentation reviews.
• Monitoring over all welding in the field / workshop with respect to the correct usage and application of the WPS
• Carries out monitoring and final inspections as required by approved ITP & QCP.
• Preparation of daily welding reports & Welding summery.
• Witnessing of Weld repair activities as per Client approved WPS.
• Line walk and Punch List preparation before Hydro Test.
• Preparation and Reviewing of Hydro test packages.
• Witnessing of Hydro testing, Pneumatic testing as per client approved procedures.
• Reinstatement of piping systems after completion of all hydro testing activities.
• Verify contractor’s records of calibration, inspection & test equipment.
• Liaise with Project Engineers, PMC, Discipline Engineers, Vendor representatives and Company Technical focal points regarding inspection activities.
• Prepares of NCR’s for any disposition actions and monitor CA taken for close out.
Share on Facebook
Share on Twitter
Share Via Email