Francisco Ramos

Oversee the implementation of Technip KSA and Client HSE Management System, Statutory Legal Requirements of host country and Industry Standards.
Review and analyse the Hazard Identification Plan and Safe Work Procedures submitted by Contractor to eliminate or reduce unknown hazards on each task.
Performs mentoring and guidance to other HSE Officers and provides manpower allocation to project requirements.
Permit to Work (PTW) Assessor and Coordinator.
Review and Audit Construction and Pre-Commissioning related documents like Permit to Work, Risk Assessments and Method Statement.
Providing advice and whenever necessary hands on support to the Contractor in such activities as Job Hazard Analysis, Risk Assessment, environmental monitoring and Incident Investigation and analysis.
Supervise regular field exercises for Drills at the Barge and Vessels.
Prepare, Analyse and report Key Performance Indicators and Lagging Indicators to Project Management meetings.
Lead the Weekly Walkthrough of Management around the Offshore Facilities and prepare related reports to ensure compliance with Company and Client Standards.
Assess contractor orientation programs aimed at promoting accident prevention among personnel, supervises specific emergency drills to enhance personnel immediate response to different type of emergency situations.
Monitor the Contractor hazardous/non-hazardous waste disposal program to ensure waste is collected and disposed of as per Company and Client procedures.
Participate and spearhead in Incident Investigations and using experience and knowledge to provide advice to assist the Contractor in compiling an accurate report with achievable recommendations.
Participating in the review of Contractor Risk Assessments, Method Statements for (Commissioning) and Permit To Work (PTW) documentation for the organization and contractors. Ensuring their adherence to safe and good working practices
Hold regular HSE meetings with Client and Contractors; Write the minutes of the resulting discussions and action points.
Assisting in the development of emergency response procedures and drills with contractor HSE management, close-out of corrective actions arising from all HSE activities.
Audits the Air, Noise and Waste Pollution abatement Policies and Procedures if in line with the legal requirement and industry best practices and its effectiveness.
Liaise between the Technip KSA, Khafji Joint Operations and Contractor HSE group and assist in cascading Corporate HSE initiatives to the Contractor site teams
Ensure that Hazards are identified, assessed and managed for all project activities in order to ensure that a safe and high quality project execution and delivery is achieved at the Project sites.
Conduct training for Confined Space Entry and Rescue, Work at Height, Manual Handling and ISO 14001 OSHA 18001 Awareness to all contractors.
Perform safety inspections on OS and DS Vessels/Crew Boats and Platforms where all major tasks are being performed.

• HSE Advisor: (Apr.2011 to Feb. 2014) - TOTAL E&P Qatar

Duties & Responsibilities:

Administer the implementation of Total E&P QHSE Management System, Statutory Legal Requirements of host country and Industry Standards.
Liaise with Total Management and Contractor Management as to contracts/project safety requirements.
Review and analyse the Safe Work Procedures to eliminate or reduce unknown hazards on each task.
Audits the Air, Noise and Waste Pollution abatement Policies and Procedures if in line with the legal requirement and industry best practices and its effectiveness.
Provide employees comprehensive and practical guidance and training, e.g. ISO 14001 and OHSAS 18001, H2S, BA familiarization, Ergonomics, etc.
Review Gap Analysis between TEPQ procedures and contractor procedures.
Conduct Internal Audits on OHS Management System and Environment Management System (OHSAS 18001:2007 & ISO 14001:2004).
Perform safety inspections on AHTS Vessels, Crew Boats and Unmanned Platforms with occasional visits to other facilities like warehouses and plants.
Facilitate in the HSE Meeting and Crew TBT.
Perform Cause Tree Analysis on major incidents/accidents to uncover the root cause of any incident/accident and render recommendation to prevent from repeating again.
Developed Job Risk Analysis for the Yard & Warehouse Operation.
Conducting audit on PTW, JSA, behaviour and site Anomaly observed to ensure conformity with regulations and organizational policies.
Conduct Hygiene & Sanitation Inspection onboard the vessels.
Write Weekly HSE Reports with recommendation on issues that will require management intervention.

• HSE Advisor: (Dec.2007 to Mar. 2011) - McDermott Middle
East, Dubai, U.A.E.

Duties & Responsibilities:

Oversee the execution of McDermott and Client's Loss Prevention Safety Program.
Interpreting & keeping management and workers of new and developing
legislation and other standards. Liaised with Client and Project Management as to contracts/project safety requirements. Provide employees and vendors
comprehensive and practical guidance and training. Involve in setting up safety requirements, i.e. safety inspections and audits on working barges, DP
Vessels, boats and platforms. Supervise the Committee Meetings like Safety
Meetings, Crew Meetings and Employee Welfare Meetings. Chairs and facilitate
hazard identification studies and risk assessments as part of work-pack and pre-job assessments ensuring that all necessary risk assessments
required by legislation are carried out. Perform accident/incident
investigation with Root Cause Analysis. Collate and analysis of Health and Safety
performance data at worksites and project level. Provide feedback to worksites and PMT as necessary on areas for improvement or to highlight
best practice. Conduct safety briefing to all incoming crew joining the vessel or barge. Manage the Muster List and Stations on-board.

Duties & Responsibilities:

Supervise the execution of AMEC’s and ConocoPhillips Loss Prevention Safety Program. Provide employees comprehensive and practical guidance and training on: Emergency Evacuation, Toxic Gases & Chemicals (Ex: H2S, Mercury, Hydrocarbons, BTEX, etc.), Permit to Work System, Ergonomics and HASAWA 1974. Discussed SIMOPS operations to Project Management Team any safety concerns and to give a heads-up to critical issues. Conduct safety inspections and audits on accommodation barge and platforms. Attend daily Pre-Shift Meetings and Crew Toolbox Meeting and highlights lessons learnt from previous shift. Perform Site, PTW, TBT and JHA audits then report/recommend immediate action to be taken on the problem observed. Conduct Accident Investigation and Root Cause Analysis on high potential incidents/accidents.

• HSE Officer: (Dec. 2005 to May 2007) - Consolidated
Contractors Int'l Corp.

Duties & Responsibilities:

Liaised with Client, Company and Contractor project safety requirements; site
audits, Unsafe Operations, PTW audits etc. Provide employees in giving wide- ranging practical guidance on Safe Working Procedures as per industry
standard. Take immediate action to correct the unsafe observations within my
jurisdiction. Act as Lead HSE Accident Investigator. Recommends the appropriate PPE based on risk assessment. Ensure the provision of first aid,
fire safety and emergency procedures. Makes daily reports with recommendations to issues that will require management involvement. Monitor of Excavation, Scaffold Erection, General Lifting Operation, Structural
Erection, Pipe Erection and Welding activities.

• Field Service Rep / HSE Officer (2001 - 2004) - Ecolochem /
General Electric Co.


Duties & Responsibilities:

Act as commissioning HSE Officer, Liaise with Ecolochem and Client, Project
Management on project safety requirements; Daily operations report, Safe
Working Procedures, etc. Perform HSE Plant Orientation to all Contractors.
Conduct Accident or Near Miss investigation and reporting. Ensure that all work is
carried out in accordance with the Company Management System Procedures.
Operate and Maintenance of the Water Treatment facility with EDI
Technology. Modify of system and piping repair. Write technical report for the client.

Duties & Responsibilities:

Ensuring the company is aware of the legal obligations and recommended
Codes of Practice. Assist in the Bid Proposals for the project. Create/review
safety procedures for operation of machineries, equipment, etc. and advising on possible hazards when considering the introduction of new
machineries, materials, new processes or change in existing ones. Warrant
that all accidents and incidents are fully reported, investigated and closed.
Providing regular health, safety and housekeeping inspections which cover
buildings, plants, services, and fire arrangements, to ensure conformity with regulations and organizational policies. Arranging for the provision of personal protective equipment (PPE) based on risk assessment. Perform Safety
Orientation to all Employees about the importance of Safe Practices. Assist in the screen candidates for employment.

• Piping Engineer (1997 - 1998) - Chiyoda-EEI Corporation


Duties & Responsibilities:

Performs Pipe routing and layout. Conduct Billing of Materials.
Make Isometric drawing extraction.
Other Function: Perform Computer installation and set-up and maintenance, Customization of
AutoPlant software. Execute Software installation and configuration. Complete
Files and Database management.