Ibrahim Zakaria AL-Najjar, MEP Packaging Engineer

Ibrahim Zakaria AL-Najjar

MEP Packaging Engineer

Salini Impregilo

Location
Saudi Arabia - Riyadh
Education
Bachelor's degree, Electrical Engineering
Experience
18 years, 2 Months

Share My Profile

Block User


Work Experience

Total years of experience :18 years, 2 Months

MEP Packaging Engineer at Salini Impregilo
  • Saudi Arabia - Riyadh
  • My current job since February 2015

- Review the design drawings, specifications and scope of work.
- Preparation of Detailed BOQ’s and Tender Packages for all electromechanical works.
- Prepare the Tender packages for tender request from sub-contractors and Suppliers.
- To coordinate with the subcontractor for the Submission of bid offers.
- Selection of Materials with respect to Specifications and drawings.
- Coordinating with the Consultant & Supplier for the submission of material samples and approvals.
- Technical and Commercial Analysis of bids received.
- Budget and Pricing Analysis for Electrical, Low current, Mechanical, and Plumbing systems.
- Prepared Direct Cost Estimation analysis for electrical works regarding building constructions.
- Compare the BOQ’s with Subcontractor and Suppliers.
- Technical support for site Top Supervision.
- Coordination with subcontractors, suppliers, for all interfaces and approvals.
- Reviews method statements to ensure that the sub-contractor proposal is feasible and will achieve the intended purpose.
- Review and approve sub contractor's payment in line with estimated work completion so that he can be paid for the actual work done.
- Reviews and approve Contractor's change order request and variation so that legitimacy and extent can be confirmed.
- Highlighting and clarifying discrepancies with the clients/designers in coordination with the superiors.

Sr. Procurement Engineer at Drake & Scull International
  • Saudi Arabia
  • April 2013 to January 2015

To establish a procedure for procurement, purchasing of materials, equipment’s and hired Sub-contractor.
-Responsible for procurement of all materials and subcontracts at the most advantageous terms and conditions, taking into account quality, price and delivery.
-Send inquiries to the approved suppliers or subcontractors after preparing request for quotation which consist of Specification, Drawings, and BOQ for Low current, High current, HVAC, and Fire Fighting.
-Submit the material submittals to the consultant/client (after reviewing) for approval.
-Release an order when we receive approved material.
-Select the potential bidders lists based upon the nature of the job from the existing data regarding contracts maintained in a data bank and ensure pre-qualification status.
-Draft contract documents to safeguard Company’s interest and ensure balanced fairness between the two contracting parties.
-Develop and prepare price schedules in line with agreed contracting strategies.
-Review and report on contractual deviations in bids.
-Carryout the commercial bid evaluations and establish the award recommendation.
-Study and evaluate claims and change order requests in accordance with contractual obligations and advise on appropriate measures.
-Establish and implement insurance administration within the projects in collaboration with Finance and Legal Departments.
Projects:
-Government Complex in Makkah. (240 Million SAR).
-KSU Endowment (330 Million SAR).
-LAMAR Tower in Jeddah. (535 Million SAR).

Electrical Engineer at Saudi Oger
  • Saudi Arabia - Riyadh
  • February 2011 to April 2013

Prepared Tender request for electrical works in construction projects.
-Prepared Direct Cost Estimation Analysis for Electrical works regarding buildings constructions.
-Technical support Engineer for site Top Supervision.
-Prepare Material Submittal Regarding Electrical works in construction projects.
-Attending the technical meetings.
-Reviews materials and equipment to ensure that they are in accordance with the specifications.
-Reviews method statements to ensure that the sub-contractor proposal is feasible and will achieve the intended purpose.
-Responds to sub contractor's request for information to clarify ambiguities.
-Review and approve sub contractor's payment in line with estimated work completion so that he can be paid for the actual work done.
-Reviews and approve Contractor's change order request and variation so that legitimacy and extent can be confirmed.
-Highlighting and clarifying discrepancies with the clients/designers in coordination with the superiors.

ELECTRICAL DESIGN at Consolidated Consultant (CC)
  • Jordan - Amman
  • August 2008 to February 2011

Designing all projects electrical systems :
- Lighting system (Buildings, Streets, Bridges, Tunnels, hospitals) .
- Power systems, computer networks, telephone system, structural cabling networks, VOIP
system, DECT system .
- Fire alarm and voice evacuation systems applying BS and NFPA standards .
- A/V systems, Projection and Presentation Systems .
- Sound Systems, Public Address and Background Music .
- Conference, Voting and Interpretation systems.
- Clock system, MATV and CATV systems, CCTV Surveillance Cameras .
- Card access and Security systems .
Voice and Video Intercom System .
- Lightning and Earthing systems .
- Medium Voltage Networks including substations, switchgears, RMUs, MV cables, preparing
schematic diagrams, room's layouts, trenches, foundations, related civil works, all according
to local utilities requirements such as JEPCO and NEPCO in Jordan, ADWEA, DEWA and
FEWA in UAE, KAHRAMA in Qatar, etc .
o Preparing documents for projects including specifications, preambles, priced bill of quantities
and technical reports .
o Fulfill all International and local standards and regulations on electrical designs including:
- IEC, NEC, NFPA, CIBSE, IEE, BS, DEWA, FEWA, ADWEA, Saudi SEC, Etisalat, JEPCO,
NEPCO, JTG, ACC, Angola regulations, Libya Regulations (GECOL).

o Supervision :
- Check the contractor shop drawings .
- Contact the contractors, subcontractor and check their work executions .
- Performing site visits to the location of the project to give instructions and guideline to
contractors
I designed the projects below :

• AD Courts in Abu Dhabi.
• Gira infrastructure Project in Libya.
• Alhaj Oases in Ma'an.
• USAID Schools in Jordan.
• Shams Al-riyadh Villas in KSA.
• Ma’an Development Area in Jordan.
• Um AL Amad Villas in Jordan.
Al-Ersal Center, Palestine, 2010, Elec. Designer .
Canadian Embassy, Amman - Jordan, 2008, Lead Elec. Designer

ELECTRICAL DESIGN at UCS (Universal Consulting Service)
  • Jordan - Amman
  • February 2008 to August 2008

ELECTRICAL DESIGN INCLUDES:
LIGHTING DESIGN
POWER DESIGN
COMMUNICATION DESIGN
FIRE DETECTION AND ALARM SYSTEM DESIGN
EARTHING AND LIGHTNING
LAW CURRENT SYSTEM DESIGN
VOICE EVACUATION, NURS CALL SYSTEM, CLOCK SYSTEM DESIGN

BILL OF QUANTETIES AND PRICING
CONCEPT DESIGN REPORT
PREAMBLES AND TENDER DOCUMENTS

Electrical designer at Meda (Mechanical & Electrical Designer) Consulting Engineer
  • Jordan
  • January 2007 to February 2008

- -Lighting Design According to IES standard
- Power Design started from transformer to the electrical equipment's and power sockets according to British Standard.
- Fire alarm system according to Jordan civil defense standard.
- Lightning design according to BS.
- Earth system .
- Public address system.
- Nurse call system.
- Security system.
LUX design using DIALUX program
Voltage drop calculation using ECODIAL program
Making bill of quantity
Supervisor in sometimes
Projects I work in :
Design an Electrical planning for: -

- Educational General Hospital in Dubai.
- Wood Factory in ALQASTAL.
- Lightweight Concrete Factory in ALQASTAL.
- Residential Housing in ALAQABA.
- AYLA (Hangar for planes) in ALAQABA.
- Arab Bank in Amman.
- Insurance Building in Amman.

Electrical Site Engineer. at alkeena hygienic paper Mill Company
  • Jordan
  • March 2006 to January 2007

Follow up electrical installation for client project.
-Coordinate between civil works and electrical works.
-Preparing progress report & Pushing on the subcontractor to expedite the work.
-Attending the technical meetings.
-Inspects deliveries/installed/constructed work to ensure that it is according shop drawings and specifications.
-Monitoring on a daily basis the construction activities work and manpower.
-Reviews materials and equipment to ensure that they are according specifications.
-Responds to sub contractor's request for information to clarify ambiguities.
-Reviews and approve Contractor's change order request and variation so that legitimacy and extent can be confirmed. Ensures that issues related to local codes, such as health and safety executives and environmental impact issues are complied with.
-Where required, provides a snag list for outstanding minor work by the subcontractor.
-Highlighting and clarifying discrepancies with the clients/designers in coordination with the superiors

Education

Bachelor's degree, Electrical Engineering
  • at University of Jordan
  • February 2006

GPA is (2.74 Out of 4) Undergraduate courses - Course of GSM from Jordan University. - Course of Advanced Matlab Simulation &GUI. - Communication Systems. - Digital Communication and Coding. - Networks. - Power Generation. After Graduate Courses -Introduction of UNIX operating system from STS (Sun Solaris 9) -UNIX Administration from STS (Sun Solaris 9). -U.S Agency for International Development (USAID)-Tatweer Project. Received 85Hours of training on Interpersonal and management skills through Tatweer’s Maharat on the job training .Main topics covered: - Positive Thinking. - Communication Skill. - Time Management. - Project Management - Problems Solving. - Creation. - Presentation Skills. - SOWT Analysis. - Banking Export. - Stress Management. - Accounting for Non Accountants. -Marketing Plan.

Specialties & Skills

Engineering
Procurement
Contracts
Technical Support
Electrical Design
Computer
Programming

Languages

Arabic
Expert
English
Intermediate

Memberships

Jordan Engineers Association
  • Electrical engineer
  • March 2006
Saudi Council of Engineers
  • Mamber
  • February 2011