mechanical technician
bismillah engineering Workshop
Total years of experience :8 years, 3 Months
Bismillah Engineering Workshop, - Mechanical Mechanic Technician
Company Brief: Bismillah Engineering Works is a leading Prepare, repair/maintenance equipment unit
Sheikhupura road Lahore, Punjab. 01/2018 .current
Responsibilities:
• Manage and monitor daily operation of equipment /machines
• Oil and gas rotating and handling tools repair & maintenance
• Prepare repair/maintenance/Overhauling of Centrifugal pumps (water, pulp, mud, juice , chemical, slug, etc.)shaft, casing, section plate, stuffing box, sole plate and base plate etc. and blowers, valves (valves body, stem, shaft, gate, ball, needle, etc.)gate, needle, ball, globe, etc ., conveyors (chain, bucket, belt etc. Mixture m/c, vibrators, meshing m/c, dryer etc.
• Repair/Maintenance Hydraulic and pneumatic systems replace / change /maintenance
• Inspection of piping include chucking the joint, valves, thread prepare, repair/maintenance.
• Using the strategy of routine maintenance.
• Lathe machine, shaper machine, planner machine, milling machine, arc-welding, operations also known, Prepare& repair/maintenance developed many shapes .
Major projects:
• ABC land drilling company(Afghanistan/all Pakistan)
• Flying Paper And Board Mill, cement plant, glass mill
• TOYO NASIC glass industry and many more.
Major Achievements:
• Motivated and encouraged the maintenance team to consistently achieve 100% performance targets, Less rate of rejection.
• Increase productivity, Work on time.
• Control/reduce the downtime
Mechanical Mechanic Technician -21 May 2014 to Dec. 2017
Responsibilities:
• Working with service casing & tubing (T.R.S) division,
• Expert in troubleshooting, overhauling and maintenance of oil field equipment,
• HANLING TOOLS: CMXL-SLIP, SDML, SDXL ROTARY HAND SLIP, SINGLE JOINT
• ELEVATOR, SIDE DOOR ELEVATOR, SAFETY FUSE, HYT/HYC, YT/TC ELEVATOR AND ITS SLIPS, SAFETY
CLAMP, BOWL FOR SLIP, CPS slips for conduct casing,
• ROTATING EQUIMENT:TONG & its JAWS(tong/backup)with spring hanger and lift cylinder, Hydraulic Power Unit 6/4 cylinders, and another equipment like as F.M.S with unit, hoses and its controls, Varco body (elevator/spider) body sizes /capacity14” to 24”-500 tons, and its slips(different sizes 7 5/8” to 24”),
• Clamp master for safety clamp, Cargo container, sling /shackles check /inspect with inspector if need to re certificate,
• Check the list of equipment to be required and identifies/requisitions of the spare parts.
• Monitor the progress of planned programs. And I have ability to read & write technical drawings (related to parts detail and assembly).also read maintenance manual, retrofit also done,
• I am able to perform jobs efficiently and safe, using company standards,
• Report any accident or near miss to HSE-coordinator, which is involve with working operation,
• Always ensure using QHSE, HSE policies & procedure, I care on it (do not use the short cut for work),
• Check all the certificates of pull equipment (inspect with N.D.T-inspector),
• Dismantle, reassemble after inspection, if paased, Repalce/change fitting, hoses, parts if needed according to comany standard/equipment manual, paint, prepared maintenance check list until green tag fix with equipment.
• Hydraulic/pneumatic systems (pumps, motors, rams etc.), and also ability to maintenance of mechanical system(gearbox, hoses and its fittings, change / cleaning bearing etc.
• Check and arrange all maintenance schdule accopding to using of the equipment / machine /tools etc.
Major projects:
• APACHI AUSTERLIA, SAUDI ARABIA, U.S.A., HOLLAND, MURITANIA, ONGC-INDIA, TOTAL BAKHOOSH, ADMA, ZADCO, ADCO ABUDHABI etc.
• DP (DUBAI PETROLIUM), OMAN, QATER PROJECTS, etc
• ONSHORE and OFFSHORE more rigs in OMAN, DUBAI, ABU DHABI, INDIA, QATER ETC
Major Achievements:
• Motivated and encouraged the maintenance team to consistently achieve 100% performance targets.
• Job satisfaction, Achieve the goal, Work on time.
• Reduce the down time, work performance in multicultural atmosphere, Support continual improvement/implement integrated management system (I M S).
Certificate of appreciation/Training :
• Completed training of pendent operated OVERHEAD BRIDGE CRANE, Basic Rigging & Lifting
• two times of star card awards,
Mechanical Technician -21 May 2014 to Dec. 2017
Responsibilities:
• Work in T.R.S operation department,
• According to moblization of required size of tubing/casing job( onshore/offshore),
• Work/supervised operation of given job with onshore/offshorecrew, and alsotraining of work with junior as well, where they need,
• Dismantle, reassemble after inspection, if paased, Repalce/change fitting, hoses, parts if needed according to comany standard/equipment manual, paint, prepared maintenance check list until green tag fix with equipment.Retrofit also done,
• Dispatch equipment according to check list procedure, with certificate of given size of job,
• Hydraulic/pneumatic systems control, maintain, replace parts (if need to replace),
• Check and arrange all colour code of equipment and slings according to given colour of month,
• Report any accident or near miss to HSE-coordinator, which is involve with working operation,
• Reporting any accident, incident or near miss to HSE-coordinator, and attended monthly’s
meeting, responsible check all equipment to QHSE-coordinator one by one trough mobilization,
Major projects:
• APACHI AUSTERLIA, SAUDI ARABIA, U.S.A., HOLLAND, MURITANIA, ONGC-INDIA, TOTALBAKHOOSH, ADMA, ZADCO, ADCOABUDHABI etc.
• DP (DUBAI PETROLIUM), OMAN, QATER PROJECTS, etc.
• ONSHORE and OFFSHORE more rigs in OMAN, DUBAI, ABUDHABI, INDIA(ONGC),
QATER etc.
Major Achievements:
• Motivated and encouraged maintenance team to consistently achieved
100% performance targets.
• Job satisfaction, Achieve the goal, Work on time.
• Reduce downtime, work performance in multicultural atmosphere,
• Support continual improvement/implement integrated management system (I M S).
Certificate of appreciation/Training:
• Completed training of pendent operated OVERHEAD BRIDGE CRANE, Basic
Rigging & Lifting
• two times of star card awards, different other training also did, during service
Mechanical Mechanic Technician . 05 august 2012 to april 2014
Company Brief: It is an oil field supplies & servicesreputable company in U.A.E. which is accountingin top-5 oil field supplies & services companies.VISA (industrial equipment instalation engineer).
Job Responsibilities:
• I had worked in service casing & tubing division,
• Inspection / Maintenance of the equipment like as Hydraulic Power Unit with set the pressure 2800psi.I have also ability to adjust/set the working pressure of hydraulic power unit.
• Maintenance include
• Rotary and handling tools (power tongs, F.M.S with unit, VARCO body, hand slips, sds slips, side door elevator, safety clamp, bowl, TS-100 with slip, sdml sd xl sds slips, cps clips etc.,
• Prepare & repair new power units with different design. I have worked in hydraulic (open and close loop), and pneumatic systems.
• Troubleshooting, overhauling, Repair/maintenance of equipment.
• Inspect the lifting equipment paint, slings according to 6 months standard.
• Inspection & Maintenance Hydraulic equipment greasing, repair and change all defect wear parts with new. Likes as hydraulic pump and motor, spur gear (rotary, clutch idler etc.),
• Manage and monitor the daily work sheet after complete every job. Using the strategy of routine maintenance.
Major projects:
• NATIONAL DRILLING COMPANY, ADMA, BUNDUQ, ZADCO etc.
Major Achievements:
• ONSHORE more than 15-rigs and OFFSHORE more than 10-rigs.
• Motivated and encouraged the maintenance team to consistently achieve 100% performance targets.
• Job satisfaction, Achieve the goal, Work on time
Certificate of appreciation:
• Best HSE-employee of the month (two times)
• Short course “CHEMICAL HANDLING” from GTSC
preparing, Reparing/Maintenance plantrelated to paper & board, cement etc., (April1999-March 2000)
Company Brief: It is world based huge setup. Under the command of Francis directors
Responsibilities:
• I had worked there as a Machinist/Workshop technician/ Maintenance service.
• Shutdown, troubleshooting, prepare and repair all kinds of machinery related to shipping, paper & board, cement plant etc.
• Maintenance all kind of machines related to m/c shop, fabrication shop like as pump body fabricate spool rolls, dryer, developments of different shapes, etc. Hydraulic & Pneumatic mechanism repair/maintenance.
Major projects:
• Bashundra paper & board mill Meaghna, Khulna cement plant, and many more project in different countries like as Canada, Kuwait, Malaysia etc
University Of Engineering & Technology Lahore Punjab .2006-2010 B.Tech(honors):mechanical production • Awarded got the first position in all technologies • Got merit certificate from U.E.T • Graduated with A+ GRADE
: