Sajid Siddique

Coordinate between customer, design team and Production team.
Ensure the compliance of MTC, s for coded job materials with applicable code.
Handle the material of different types at incoming stage, during fabrication, during welding and at final stages.
Monitoring and witness of fabrication activities (Rolling, edge preparation, beveling and fit up).
Dimensional inspection of incoming material, during fabrication and at final stage.
Monitoring of welding consumables handling and storage.

Prepare PQP/ ITP/ QIP’s as per the standard / code / drawings and customer furnished requirements.
Prepare quality control manual, Execute internal audits, coordinate in external audits and ASME stamp certifications (U, U2, S, R, PP, A & NB).
Coordinate between design team, Customer and Authorized Inspector.
Sourcing & hiring of third parties for design review & project inspections.
Ensure the compliance of MTR’s for coded job materials with applicable code/ standard.
Perform inspection of incoming material at incoming stage.
Handle the material of different types at incoming, during fabrication, welding and at final stage.
Perform dimensional inspection of incoming material, during fabrication and at final stage.
Prepare PWHT specifications, reviewing PWHT reports / charts to ensure the compliance with applicable code / standard/drawing.
Perform inspection activities, hydrostatic and leak tests as per applicable code / specification/ standard / drawings.
Supervise the QC staff for welding inspections & fabrication of pressure vessels, boilers, separators, tanks, boozers & piping.
Ensure the implementation of design codes and standards throughout design and manufacturing processes through assistance of equipment design team by providing requisite quality standards information and subsequent technical review of the design documents from QC perspective.
Raise the non-conformance reports (NCR) for rectification of discrepancies.
Prepare repair procedures for repair jobs.
Prepare manufacturing data books for the projects.
Prepare MDR (Manufacturer’s Data Report) for stamped equipments.
Review PDR (Manufacturer’s Partial Data Report) of welded dish heads procured from other manufacturer for use in stamped equipments.
Develop, initiate and maintain procedures associated with ASME, CE Marking and ISO 9001:2008 for assorted projects.

Prepare WPS as per ASME IX, AWS D1.1, API 1104, BS EN 15614, ASME VIII, ASME B 31.3, and applicable project specs and maintain procedure qualification record (PQR) as per ASME, AWS D1.1 and EN standards.
Welding inspections, fabrication of Pressure Vessels, Steel Structure, Boilers, Tanks, Piping, Piping inspections.
Performing fit-up inspection as per inspection and test plan and supervision of material Fabrication. Which include dimensional and quality Checking.
Witnessing of Welder Performance Qualification Tests and reviewed its NDE & Prepared the welder qualification records as per ASME, AWS & EN standards.
Controlling pre-heating before commencing welding if required and selection and implementation of pre-heating temperature as per spec and codes.
Review project specifications for requirements of NDE, procedure and welder qualification if any.
Lead, plan, organize and coordinate with team of welding inspectors and subcontractors’ technicians.
Inspection of welding, piping and fabrication of mechanical equipment as per international standards and applicable project specifications.
Review of the NDE and Mechanical & Physical test reports as per international standards and applicable project specifications.
Prepare PWHT specifications, reviewing PWHT reports / charts to ensure the compliance with applicable code / standard/drawing.
Perform inspection activities, hydrostatic and leak tests as per applicable code / specification/ standard / drawings.
Raise the non-conformance reports (NCR) for rectification of discrepancies.
Preparation and submission of as built records, NDT records etc, for the pressure test package.
Carried out RT, UT, MT, PT for piping and structural.
Thickness measurement and hardness testing on piping.
Dye penetrates testing and magnetically particle testing of fabricated spools.
After RT completion evaluation and interpreted films are submitted to the clients.
Dye penetrate testing on pressure vessels and heat exchanger.
UT lamination check on thick structural plates.
Positive Material Identification Test (PMI) on Stainless Steel.
Writing up reports and collecting records for QA/QC assessments.
Maintaining records of the job order completed and QC check approved.

Prepare WPS as per ASME IX, AWS D1.1, API 1104, BS EN 15614, ASME VIII, ASME B 31.3, and applicable project specs and maintain procedure qualification record (PQR) as per ASME, AWS D1.1 and EN standards.
Welding inspections, fabrication of Pressure Vessels, Steel Structure, Boilers, Tanks, Piping, Piping inspections.
Performing fit-up inspection as per inspection and test plan and supervision of material Fabrication. Which include dimensional and quality Checking.
Witnessing of Welder Performance Qualification Tests and reviewed its NDE & Prepared the welder qualification records as per ASME, AWS & EN standards.
Controlling pre-heating before commencing welding if required and selection and implementation of pre-heating temperature as per spec and codes.
Review project specifications for requirements of NDE, procedure and welder qualification if any.
Lead, plan, organize and coordinate with team of welding inspectors and subcontractors’ technicians.
Inspection of welding, piping and fabrication of mechanical equipment as per international standards and applicable project specifications.
Review of the NDE and Mechanical & Physical test reports as per international standards and applicable project specifications.
Prepare PWHT specifications, reviewing PWHT reports / charts to ensure the compliance with applicable code / standard/drawing.
Perform inspection activities, hydrostatic and leak tests as per applicable code / specification/ standard / drawings.
Raise the non-conformance reports (NCR) for rectification of discrepancies.
Preparation and submission of as built records, NDT records etc, for the pressure test package.
Ensure the implementation of design codes and standards throughout design and manufacturing processes through assistance of equipment design team by providing requisite quality standards information and subsequent technical review of the design documents from QC perspective.
Carried out RT, UT, MT, PT for piping and structural.
Thickness measurement and hardness testing on piping.
Dye penetrates testing and magnetically particle testing of fabricated spools.
After RT completion evaluation and interpreted films are submitted to the clients.
Dye penetrate testing on pressure vessels and heat exchangers.
UT lamination check on thick structural plates.
Positive Material Identification Test (PMI) on Stainless Steel.
Writing up reports and collecting records for QA/QC assessments.
Maintaining records of the job order completed and QC check approved