يونس velan R

  Develop the Project schedule using P6 for each project, which is in line with the project requirements, for various gates starting from concept to close out which provides the schedule basis for estimation
 Development and review of the project planning process for all new and existing projects that are executed thro’ the OPD.
 Track progress of the projects based on the approved baseline schedule and forecast shortfalls if any to the PMT.
 Review the CTR and the detailed schedule of contractor for all the phases of EPC Project.
 Preparation of master schedule for the entire portfolio of operations departments and preparation of monthly progress status stewardship reports.
 Preparation of quarterly resource plan for the Operations department.
 Coordinate with the Operation Projects division and Shutdown groups regarding the shutdown requirements of Projects to be executed during Train Shutdowns.
 Prepare and review project specific and other procedures pertaining to Planning department.
 Develop the Shutdown project plan and review and coordinate all operation and Maintenance works for the Shutdown projects in the nominated Asset areas.
 Prepare and provide work order details, review work instructions and prepare execution pack for SD projects.
 Attend regular weekly and daily shutdown meetings right from the conceptual phase till the execution of shutdown.
 Follow up with all concerned on approvals and instructions, attend meetings and liaise with other departments on all issues of the project deliverables.

  Development of the project planning process and create the project schedule.
 Drafting of bid schedule & resources histogram, Review of schedule submitted in the bid and prepare detailed baseline schedule during design and construction stages for the project
 Create the initial network of activities in simplified form for project program in Primavera & maintain the critical path diagrams to ensure meeting of project milestones.
 Prepare detailed budget & cash flows in conjunction with engineering and project management goals and milestones
 Monitor the weekly & monthly progress and report the same to PMO in Germany .Preparation of commercial timesheets for reimbursable portion of the projects.
 Preparation of Cost estimate during pre-bid stage and control budget after award, for the projects.
 Coordination between Home office in Germany and Project office/site office in India to ensure all deliverables are prepared and delivered in time.
 Finalization of EPC contracts for all the clusters.
 Vendor development, vendor co-ordination for the equipment which were fabricated under Technology transfer from ETAG, Germany.
 Development and review of the project planning process and create a schedule, which is in line with the project requirements including establishing the sequence and duration of activities.
 Assistance in Finalization of work to be outsourced to sub-contractors, preparation of contracts including bid evaluation and terms of contract. Monitor the performance of the sub-contractor and effective contract management once the contract has been awarded.
 Assist Business Development department in getting statutory approvals from Government authorities.
 Participate in the preparation of all final documentation during the closure of the project.
 Conducting risk workshop and maintain risk register for Project.

 Participate in the development and review of the project planning process and create a schedule, which is in line with the project requirements including establishing the sequence and duration of activities.
 Prepare SOW and provide techno- commercial input for finalization of the EPC Subcontracts to the Contracts division.
 Review all contract documentation to assess feasibility of construction, identify any potential areas of difficulty and take note of any variations required in the construction.
 Generate TDR (Technical Document Register) as a level 4 schedule and ensure that all relevant data required for construction is contained in it. Monitor the issue of drawings as per the forecast dates mentioned in the TDR, identify any discrepancies and bring it to the attention of the Lead Engineer. Take corrective actions wherever required in the case of missing data from either the client or vendor.
 Review Engineering drawings, documents and deliverables relating to area of functional responsibility to assess constructability and consistency with contract requirements. Prepare and issue purchase requests for materials and consumables.
 Coordinate all project related activities with other departments and sections to ensure effective integration of tasks and minimize potential delays.
 Participate in the finalization of work to be outsourced to sub-contractors including bid evaluation and terms of contract. Monitor the performance of the sub-contractor once the contract has been awarded.
 Monitor the progress of the project as per the project plan and against the client’s requirements and take corrective action whenever required.
 Follow up with clients on approvals and instructions, attend client meetings and liaise with client on all issues of the project deliverables.
 Participate in the project activity report preparation and verify all data to ensure that it is accurate and accurately reflects the status of the project.

 Monitoring of Daily, weekly and monthly Project progress and Progress measurement with the aid of various daily reports and physical verification, if required.
 Preparation of weekly charts for monitoring various project progress parameters.
 Daily and weekly Punch List progress monitoring. Daily monitoring of Hydro test package progress and system turnover progress.
 Attending weekly construction and project progress meetings. Cross verifying physical quantities pertaining to monthly progress reports.
 Maintenance of trend analysis and scope change control register.
 Project progress and productivity monitoring and reporting. Project cost control and forecasting.
 Schedule and monitor project activity to achieve an “on-time” result including follow-up with contractors/external agencies to ensure timely response to action items.
 Assist the project manager to develop and implement recovery plans for off-schedule and unanticipated eventualities.
 Preparation of periodic management and other reports and presentations as required by the project manager.
 Conduct site visits as required to ensure that the piping and equipment are correctly quantified and specified to meet the worksite restrictions/limitations as well as being fit for purpose.
 Oversee and ensure that all contractors assigned meet quality, cost and schedule targets
 Ensuring compliance with the project execution plan (PEP).
 Maintaining of close contact with Client throughout the project to ensure satisfactory reaction to Client’s needs or criticisms.
 Monitoring and control of project performance against budget, schedule, and quality and safety.
 Issuing of directions for job close-out and the securing of the final project acceptance and contract release from Client.
 Coordinate with relevant certification agencies for the endorsement of regulated activities.
 Participate in the preparation of all final documentation during the closure of the project.
 Participate in the formal review of the project post completion to identify areas for improvement

 Handled functions entailing
 Preparation of Level 1/2/3 Project Schedule and measuring/monitoring daily progress.
 Preparation of daily and weekly job schedule for individual groups/divisions.
 Heavy lift /Erection planning & preparation for Static and rotating equipments.
 Planning of Material and manpower for day to day Site requirements.
 Co Ordination with material suppliers for supply of materials.
 Planning for site assembly and erection of Fin fan coolers, air compressors, pumps, vessels, heaters, desalters, Separators and crude recovery units pertaining to oil & Gas plant.
 Project Planning using PRIMA VERA P3 and other Project Control activities.
 Material Management in sites using MIS systems and other software based material management systems for control of consumables, permanent project material and general stock keeping.
 Estimation and Cost control activities for the projects.
 Management and coordination in the preparation of procurement and construction cost reporting, including variance management, record keeping and control.
 Monitoring sub-contractor performance.
 Preparation and maintaining the cash flow for all major and routine capital items and forecast all project costs and management of monthly forecast expenditures .
 Transfer of cost estimate to the cost system and set up of project control budgets.
 Co-ordination with client, subcontractors, other agencies for day-to-day activities for piping &Steel Structural fabrication and erection and Equipment erection jobs.
 Assistance in Planning and controlling movement of equipments and manpower.
 Assistance in Hydro and pneumatic testing of pipelines and final box up.
 Assistance in allocation of jobs and assigning the targets for the Engineers, supervisors and subcontractors.

 Installation of Air Intake and exhaust systems for 8x125MW Gasturbine power project for SIEMENS AG @ AZ-ZOUR power plant, Kuwait.
 Brief project overview: Installation of heavy steel structural items viz air intake systems with filters and exhaust stack measuring 20m dia x 60m ht, Gas oil piping of around 50, 000 Dia inches.
 Owner - Ministry of Electricity & Water Kuwait; PMC - Parsons Brinkerhoff; Contractor - SIEMENS AG.
 EOCENE Upgrade - process piping for Joint operations, Wafra, Kuwait.
 Brief project overview: Process piping of around 20000 Dia inches, including sand blasting& painting.
 Owner - SAT- KOC Joint operations, Wafra, Kuwait; Contractor - SKS GC.
 Provision of manpower and equipments for GC-15 stream outlet lines at GC-15of Kuwait oil Co.
 Brief project overview : Supply of manpower & equipments for construction and
maintenance of GC -15 Strean outlet lines.
 Owner - Kuwait Oil company, Kuwait; Contractor - SKS GC

Projects Handled
________________________________________
• Kuwait New oil pier project for KNPC at MAA Refinery, Kuwait
 Brief project overview: Fabrication, erection, Grit blasting and painting and Insulation of Pipelines around 180000 Dia inches (CS, SS, cement lined) and support structures for New Oil pier)
 Owner - Kuwait national petroleum company, kuwait; Contractor - Hyundai engineering & Construction

Job Accountabilities
________________________________________
 Was involved in all aspects of Project Management, viz.
 Executing Day to day allocation of manpower and, welding machines etc, cost control, QC co-ordination, etc for execution of Pipe spool fit-ups, welding.
 Interacting with clients, site personnel, Suppliers and sub-contractors for the smooth execution of the projects and planning including preparation of daily schedules, measurement notes for the following projects
 Involved in site Technical Queries and preparation of as-built drawing for all site modification
work.
 Coordination with client, sub contractors and inspection agencies.
 Preparation of BOQ for Fabrication work.
 Planning and controlling the movement of equipments.
 Involved in hydro and pneumatic testing and final box up.
 Preparation of Inspection and test plans for Welding joints, Hydro test packages,
surface preparation, Coating and wrapping for underground and above ground piping.
This includes provision of temporary supports for test packages.
 Assisting and Co-ordination with client and commissioning team.
 Preparation of MTO and BOQ for material procurement such as pipes and pipe fittings
in conformance with contract specifications.

 ADDITIONAL FACILITIES FOR CHP, GEB, Wanakbori Thermal Power Station, Gujarat, INDIA
 Brief project overview: Fabrication and erection of structurals for conveyors,
erection of Wagon tippler.
 Owner - Gujarat Electricity board, Consultant: TCE; Contractor - Thyssen krupp industries
India ltd.
 Mechanised coal ports project for Paradip port trust, paradip, orissa, India.
 Brief project overview: Assembly, erection and commissioning of Two ship loaders for
KRUPP FOERDER TECHNIK, GERMANY with capacity 4000 TPH each.
 Owner - Paradip port trust, PMC: BHPE-Kinhill Joint venture;
Contractor - KRUPP Foerdertechnik, Germany.
 Internal coal handling plant for Tuticorin Thermal power plant, Tuticorin, India.
 Brief project overview: erection of conveyors of Length 25 kMs,
coal crushers and vibrating screens, stackers and re claimers and associated systems.
 Owner - Tamilnadu Electricity board, PMC: Tata consulting Engineers;
Contractor - Thyssen krupp industries India ltd
Job Accountabilities
________________________________________
 Integral role in
 Executing fabrication and erection of structural steel for housing conveyors.
 Erection of conveyors, (structures & Technological Structures), Junction Towers silos.
 Preparing erection schedules and execution of erection of the CHP With Sub-Contractors.
 Site assembly and erection of Bulk material handling system components such as Bucket wheel excavators, stacker-reclaimers, paddle feeders, Wagon tipplers, Ship loaders of capacities ranging from 4000 to 20, 000 tonnes per hour.
 Erection and alignment of gear boxes, prime movers, Hydraulic and Pneumatic Circuits, Lube flow systems, Crawlers and their drives fpr the above equipment.
 Erection and Alignment of Bradford breakers, ring granulators for crushing coal.

Execution of Erection , site welding and testing and commissioning of 1 No. Spreader of capacity 20, 000 tph for M/S MAN TAKRAF, Germany.

Co-ordination with client and execution of erection of the machine thro’ sub-contractors.

Testing and commissioning of hydraulic and pneumatic systems of the machine and performing PGT for the machine.